Long‐term performance degradation of various kinds of photovoltaic modules under moderate climatic conditions
- 23 February 2011
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (2) , 170-179
Abstract
Various kinds of photovoltaic (PV) modules have been developed and practically operated as PV systems up to present. Investigation of the long‐term reliability of PV modules is indispensable for the use of PV systems as reliable energy sources. In this study, we show the results of outdoor exposure test in which the performance of 14 PV modules composed of five different kinds made by six different PV manufacturers have been measured since July 2004. The average performance is calculated in each year from 2005 to 2008, and the performance degradation is quantitatively evaluated. The results are that the magnitude of the performance degradation can be clearly classified by the kinds of the PV modules. The performance difference of the single‐crystalline silicon (sc‐Si) modules between 2005 and 2008 is from 1.9% to 2.8%. Polycrystalline silicon (pc‐Si) modules show performance degradation from 0.7% to 1.4%. The performance of an amorphous silicon/crystalline silicon (a‐Si:H/c‐Si) decreased by 0.7%. Although a pair of a‐Si modules had been already exposed to sunlight for about 6 months, the pair of modules show 4.4% of performance degradation. More than half of the performance degradation happened during the initial period from 2005 to 2006. This indicates that it takes about 2 years until the performance of a‐Si modules is stable. The performance is quite stable after 2006. Interestingly, the performance of the cupper indium gallium diselenide modules in 2008 is about 0.8% higher than that in 2005. Copyright © 2010 John Wiley & Sons, Ltd.Keywords
This publication has 24 references indexed in Scilit:
- The results of performance measurements of field‐aged crystalline silicon photovoltaic modulesProgress in Photovoltaics: Research and Applications, 2008
- History of accelerated and qualification testing of terrestrial photovoltaic modules: A literature reviewProgress in Photovoltaics: Research and Applications, 2008
- Accelerated and outdoor aging effects on photovoltaic module interfacial adhesion propertiesProgress in Photovoltaics: Research and Applications, 2008
- Photovoltaic module reliability model based on field degradation studiesProgress in Photovoltaics: Research and Applications, 2008
- Evaluation of solar energy potential and PV module performance in the Gobi Desert of MongoliaProgress in Photovoltaics: Research and Applications, 2006
- Resistive loading of photovoltaic modules and arrays for long‐term exposure testingProgress in Photovoltaics: Research and Applications, 2006
- Performance and Reliability of 1 MW Photovoltaic Power Facilities in AIST2006
- The performance of crystalline silicon photovoltaic solar modules after 22 years of continuous outdoor exposureProgress in Photovoltaics: Research and Applications, 2005
- Accelerated testing and failure of thin‐film PV modulesProgress in Photovoltaics: Research and Applications, 2004
- Photovoltaic module performance and durability following long-term field exposureProgress in Photovoltaics: Research and Applications, 2000