Vertical impulse measurements of mines buried in saturated sand
Authors:
- 1 March 2005
- journal article
- research article
- Published by Taylor & Francis in Fragblast
- Vol. 9 (1) , 19-28
Abstract
The ultimate aim of our overall task, of which the effort described in this paper is a part, is to be able to model the impulsive output of buried charges and the response of targets of interest. It is not practical or cost-effective to determine the response of all targets of interest to buried charges of all sizes by testing them. In order to have confidence in our models, however, they must be validated by a modest number of tests. A critical element in modelling the response of a target is the ability to model the loading function. The load a buried charge applies to a target above it when the charge detonates can be characterized in terms of the vertical impulse. The vertical impulse is a function of the size of the charge, its depth of burial, and the properties of the soil in which it is buried. The primary objective of the effort described in this paper is to determine the load a known charge places on a non-responding target so the data can be used to validate our models. For model validation, a large number of detonator-scale experiments have been conducted by the University of Maryland (Fourney et al. [ 1 Fourney WL Leiste U Bonnenberger R Goodings D 2005 Predicting explosive impulse by means of small scale tests Proceedings of the Thirty-First Annual Conference on Explosives and Blasting Technique, International Society Of Explosives Engineers, Cleveland, Ohio ]). It was also necessary to conduct a modest number of experiments at a larger scale, nine in total, to ensure that the results of the detonator-scale tests can be satisfactorily scaled up. Of the nine large-scale experiments conducted, seven were conducted with 5 or 10 lb cast TNT charges. All experiments were conducted in sand that was as nearly fully water-saturated as possible. The objective of the experiments was to determine the vertical impulse applied to a non-deforming target plate above the charge. The large-scale experiments were conducted using the Vertical Impulse Measurement Fixture (VIMF) at the Army Research Laboratory, Aberdeen, MD. The VIMF is a unique facility that has been designed specifically to measure accurately the vertical impulse from buried charges weighing up to 8 kg. This paper describes the VIMF and its instrumentation, test methods and test results. The results obtained demonstrate that in some cases, when the soil is saturated sand, explosive ‘bubble’ effects similar to those encountered in shallow water are encountered.Keywords
This publication has 3 references indexed in Scilit: