Evaluation of TiO2 Nanoparticles Concentration and Applied Current Density Role in Determination of Microstructural, Mechanical, and Corrosion Properties of Ni–Co Alloy Coatings
- 1 March 2020
- journal article
- research article
- Published by Pleiades Publishing Ltd in Protection of Metals and Physical Chemistry of Surfaces
- Vol. 56 (2) , 320-327
Abstract
The goal of the present investigation is to evaluate the influences of plating parameters such as TiO2 nanoparticles concentration in the plating bath and applied current density on the microstructure-related and mechanical properties as well as corrosion behavior of Ni–Co coatings. The coatings were fabricated by different current densities and TiO2 nanoparticles concentration over the range 2–8 A dm–2 and 0–30 g/L, respectively. Results demonstrate that the incorporation of TiO2 nanoparticles into the plating bath coupled with the change in current density can deeply affect the microstructure-related, mechanical properties as well as corrosion resistance of Ni–Co coatings. According to the results, Ni–Co–20 g/L TiO2 coatings electroplated at current density of 4 A dm–2 shows the superior properties. The synergistic effects of higher Co amount coupled with the higher volume fraction of TiO2 throughout the microstructure of the coating is responsible for the above-mentioned improvements.Keywords
This publication has 49 references indexed in Scilit:
- Characterizations of nanocrystalline Co and Co/MWCNT coatings produced by different electrodeposition techniquesSurface and Coatings Technology, 2013
- Study of the corrosion behavior of electrodeposited Ni–P and Ni–P–C nanocomposite coatings in 1M NaOHElectrochimica Acta, 2012
- Characterization of Ni-W/MWCNT nanocomposite layers formed by pulsed electrochemical depositionProtection of Metals and Physical Chemistry of Surfaces, 2011
- Electrodeposition and mechanical properties of Ni-W-B composites from tartrate bathProtection of Metals and Physical Chemistry of Surfaces, 2010
- Improving the corrosion and tribocorrosion resistance of Ni–Co nanocrystalline coatings in NaOH solutionCorrosion Science, 2009
- Electrodeposition of Ni–Co/Al2O3 composite coating by pulse reverse method under ultrasonic conditionMaterials Letters, 2008
- Electrodeposition of Ni–P Alloys From a Sulfamate ElectrolyteJournal of the Electrochemical Society, 2008
- Preparation and characterization of nickel–cobalt-diamond electro-composites by sediment co-depositionSurface and Coatings Technology, 2007
- Corrosion behavior of electrodeposited Ni–Co alloy coatings under the presence of NaCl deposit at 800 °CMaterials Chemistry and Physics, 2005
- Pulse co-electrodeposition of nano Al2O3 whiskers nickel composite coatingScripta Materialia, 2004