Analytical and Experimental Study on Cold-Formed Steel Built-Up Sections for Bending
Open Access
Abstract
In the construction of steel structures, the two most common types of structural members are hot-formed and cold-formed members. This paper mainly describes the analytical and experimental research on the strength and characteristics of CFS bolted built-up sigma sections having different structural arrangements under bending. The cross-sectional dimensions for the parametric study were selected by the sizes available in the market. In this paper, ANSYS workbench software was used to perform FE modeling and observe the local, flexural, and interaction of these buckling. Then, experimental study was performed by varying the arrangement of open section beams between face-to-face and back-to-back, connected using bolts or fasteners different spacings. Further, we conducted bending tests on cold-formed steel built-up members having simple edge stiffeners in the middle. Comparing both analytical and experimental studies, the results indicate that the back-to-back connected built-up beam section provides a flexural capacity higher than the face-to-face built-up section. Moreover, increasing the bolt spacing enhanced the load-carrying capacity of back-to-back sigma section built-up beams. It has also been discovered that the flexural strength of beams is primarily determined by bolt spacing or itsposition.Keywords
This publication has 19 references indexed in Scilit:
- Experimental Study of Cold-Formed Steel Built-Up BeamsJournal of Structural Engineering, 2020
- Investigation on cold-formed steel lipped channel built-up I beam with intermediate web stiffenerInternational Journal of Advanced Structural Engineering, 2019
- Flexural Strength Behaviour of Bolted Built-Up Cold-Formed Steel Beam with Outstand and Extended StiffenerInternational Journal of Steel Structures, 2018
- Bending Moment Capacity of Cold-Formed Steel Built-Up BeamsInternational Journal of Steel Structures, 2018
- Comparative analysis of stiffening style of cold-formed thin-walled channel steel members2015
- Behaviour of stiffened cold-formed steel built-up sections with complex edge stiffeners under bendingKSCE Journal of Civil Engineering, 2015
- Behaviour and design of cold-formed steel beams subject to lateral–torsional bucklingThin-Walled Structures, 2012
- Elastic Buckling of Cold-Formed Thin-Walled Channel Beams with Drop FlangesJournal of Structural Engineering, 2010
- Open cross-section beams under pure bending II. Finite element simulationThin-Walled Structures, 2009
- Open cross-section beams under pure bending. I. Experimental investigationsThin-Walled Structures, 2008