Acetate Salts as Nonhalogen Additives To Improve Perovskite Film Morphology for High-Efficiency Solar Cells

Authors:
Publisher website
Google Scholar
Abstract
Two-step method has been popularly adopted to fabricate perovskite film of planar heterojunction organo-lead halide perovskite solar cells (PSCs). However, this method often generates uncontrollable film morphology with poor coverage. Herein, we report a facile method to improve perovskite film morphology by incorporating a small amount of acetate (CH3COO-, Ac-) salts (NH4Ac, NaAc) as non-halogen additives in CH3NH3I solution used for immersing PbI2 film, resulting in improved CH3NH3PbI3 film morphology. Under the optimized NH4Ac additive concentration of 10 wt%, the best power conversion efficiency (PCE) reaches 17.02%, which is enhanced by ~23.2% relative to the pristine device without additive, whereas NaAc additive does not lead to efficiency enhancement despite of the improvement on CH3NH3PbI3 film morphology. SEM study reveals that NH4Ac and NaAc additives can both effectively improve perovskite film morphology by increasing the surface coverage via diminishing pinholes. The improvement on CH3NH3PbI3 film morphology is beneficial for increasing the optical absorption of perovskite film and improving the interfacial contact at the perovskite/Spiro-OMeTAD interface, leading to the increase of short-circuit current and consequently efficiency enhancement of the PSC device for NH4Ac additive only.
Funding Information
  • Ministry of Education of the People's Republic of China (WK3430000002)
  • National Natural Science Foundation of China (21132007, 21371164, 51572254)

This publication has 64 references indexed in Scilit: