Properties of Micro-Arc Oxidation Coating Fabricated on Magnesium Under Two Steps Current-Decreasing Mode
Authors:
Open Access
- 18 September 2020
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 7
Abstract
A concept of two-steps current-decreasing mode derived from constant current mode was developed to fabricate micro-arc oxidation (MAO) coatings on ZK60 magnesium alloy in a dual electrolyte system. The growth characteristics of coatings were analyzed by voltage-time curves, and the coating microstructures were characterized by means of scanning electron microscopy. Meanwhile, the roughness, corrosion behavior, and microhardness of MAO coatings were investigated. The results show that the MAO coatings exhibit a smooth and compact surface, and have improved hardness, higher thickness, smaller roughness, and uneven distribution of holes. Such positive characteristics result in improved corrosion resistance of MAO coatings. The coating produced under the two-steps current mode of “1.2–0.6A” shows a smaller corrosion rate of 0.1559 g/m2⋅h compared with the one produced under the other mode. The results of nanoscratch tests show that the coating fabricated by “1.2–0.6 A” mode has strong bond strength with the substrate. Under this optimized mode, the MAO process also has the lowest energy consumption of 49.8 W/(dm2⋅μm).Keywords
This publication has 70 references indexed in Scilit:
- Automatic remelting and enhanced mechanical performance of a plasma sprayed NiCrBSi coatingSurface and Coatings Technology, 2019
- Improved hardness and wear resistance of plasma sprayed nanostructured NiCrBSi coating via short-time heat treatmentSurface and Coatings Technology, 2018
- Nanotwins induced by pulsed laser and their hardening effect in a Zr alloyJournal of Alloys and Compounds, 2018
- Corrosion behavior of non-equilibrium Zr-Sn-Nb-Fe-Cu-O alloys in high-temperature 0.01 M LiOH aqueous solution and degradation of the surface oxide filmsCorrosion Science, 2018
- Improved corrosion behaviour of electron beam melted Ti-6Al–4V alloy in phosphate buffered salineCorrosion Science, 2017
- Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applicationsJournal of Magnesium and Alloys, 2017
- The yield asymmetry and precipitation behavior of pre-twinned ZK60 alloyMaterials Science and Engineering: A, 2016
- Effect of low-temperature pre-deformation on precipitation behavior and microstructure of a Zr-Sn-Nb-Fe-Cu-O alloy during fabricationJournal of Nuclear Science and Technology, 2015
- Effects of electric parameters on microstructure and properties of MAO coating fabricated on ZK60 Mg alloy in dual electrolyteRare Metals, 2012
- Study on anodic oxidation of magnesium in 6M KOH solution by alternative current impedanceInternational Journal of Hydrogen Energy, 2009