Static and Fatigue Loading of Veneered Implant‐Supported Fixed Dental Prostheses
- 9 April 2020
- journal article
- research article
- Published by Wiley in Journal of Prosthodontics
- Vol. 29 (8) , 679-685
Abstract
Purpose: This study aimed to compare the load to failure and the probability of survival of porcelain fused to zirconia (PFZ) three‐unit, implant‐supported, fixed dental prostheses (FDPs) to those of indirect composites veneered to either zirconia (CVZ) or milled fiber‐reinforced composite (FRC) frameworks under static and fatigue loading.Materials and Methods: One‐hundred and twenty posterior three‐unit FDP (second premolar pontic) frameworks were fabricated via milling from a single Standard Tessellation Language (STL) file. The FDPs were divided into three groups. Each group (n = 40) was subjected to static (n = 20) and fatigue (n = 20) loading tests, as follows: (1) PFZ: zirconia framework layered with porcelain veneer; (2) CVZ: zirconia framework veneered with indirect composite resin; and (3) FRC: FRC framework veneered with indirect composite resin. After porcelain veneering onto sintered zirconia frameworks, or resin composite veneering onto zirconia or FRC frameworks, FDPs were cemented on their abutments using self‐adhesive resin cement. After thermal cycling, half of the FDPs were subjected to an accelerated fatigue test. The other half of the FDPs were subjected to single load‐to‐failure (SLF) testing at a crosshead speed (1 mm/min). Lifetime analysis was conducted to determine the probability of survival, and fractographic analysis was performed.Results: Significant differences were observed among the studied groups for SLF with the highest characteristic strength values observed for PFZ (2154 N), followed by 1905.47 N for CVZ and 1679.56 N for FRC. The probability of survival for 100,000 cycles at 500 N was the highest for FRC (98%) and CVZ (100%) and was significantly lower for PFZ (88%). Different fracture patterns were observed in the fractography.Conclusions: In fatigue testing, which simulates masticatory function better than static tests, a higher probability of survival was observed for FRC and CVZ than for PFZ. Framework fractures were not observed only for the FRC group, indicating that chairside repair with the addition of indirect composite could be performed for continued function.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2012/19078‐7)
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (001)
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (304589/2017‐9, 434487/2018‐0)
This publication has 38 references indexed in Scilit:
- Damping behavior of implant‐supported restorationsClinical Oral Implants Research, 2011
- Reliability and Failure Modes of Implant‐Supported Y‐TZP and MCR Three‐Unit BridgesClinical Implant Dentistry and Related Research, 2010
- Fatigue and damage accumulation of veneer porcelain pressed on Y-TZPJournal of Dentistry, 2010
- A practical and systematic review of Weibull statistics for reporting strengths of dental materialsDental Materials, 2010
- The effect of core framework designs on the fracture loads of all‐ceramic fixed partial dentures on posterior implantsJournal of Oral Rehabilitation, 2007
- Failure Modes in Ceramic‐Based Layer Structures: A Basis for Materials Design of Dental CrownsJournal of the American Ceramic Society, 2007
- Adaptation of healthy mastication to factors pertaining to the individual or to the foodPhysiology & Behavior, 2006
- A bibliography of accelerated test plansIEEE Transactions on Reliability, 2005
- Strength Limitations of Transformation‐Toughened Zirconia AlloysJournal of the American Ceramic Society, 1986
- Bite force and state of dentitionActa Odontologica Scandinavica, 1977