ELECTRICAL CHARACTERIZATION OF P3HT/PCBM BULK HETEROJUNCTION ORGANIC SOLAR CELL
Authors:
- 1 March 2012
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Materials Science and Engineering
- Vol. 01 (01)
Abstract
Photovoltaic performance of bulk heterojunction organic solar cell based on poly (3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM) were investigated. The active layer is a spin coated organic blend of a p material (P3HT) and an n-material from the fullerene derivative PCBM; it is sandwiched between electrodes ITO-PEDOT/PSS and Al/LiF as back-contact. Modeling of organic bulk heterojunction solar cells is complicated because of various internal mechanisms involved. Two models have been suggested, namely an effective medium model and a network model. We applied an effective medium model where the main assumption is the p–n nanostructure is treated as one single effective semiconductor layer, and parameters in this configuration are fed into a standard solar cell device simulator, called SCAPS. In this model, other non-carrier related properties, such as the refractive index n, the dielectric constant ε and the absorption constant α are influenced by both p–n materials and used as input parameters. The power conversion efficiency of 3.88% with short circuit current density of 20.61 mA/cm2, open circuit voltage of 0.39 V and fill factor of 48% were obtained. Finally, factors which could limit cell conversion efficiency are discussed.Keywords
This publication has 9 references indexed in Scilit:
- Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cellsSolar Energy Materials and Solar Cells, 2011
- Modeling the electrical characteristics of P3HT:PCBM bulk heterojunction solar cells: Implementing the interface recombinationSemiconductor Science and Technology, 2009
- Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiolsNature Materials, 2007
- Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar CellsAdvanced Functional Materials, 2006
- High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blendsNature Materials, 2005
- Numerical simulations of layered and blended organic photovoltaic cellsApplied Physics Letters, 2005
- Organic solar cells: An overviewJournal of Materials Research, 2004
- Low bandgap polymers for photon harvesting in bulk heterojunction solar cellsJournal of Materials Chemistry, 2004
- Origin of the Open Circuit Voltage of Plastic Solar CellsAdvanced Functional Materials, 2001