Simulating Multizone Fracturing in Vertical Wells
Authors:
- 5 June 2014
- journal article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 136 (4) , 042902
Abstract
Numerous multizone multistage hydraulic fracturing treatments are now being executed in low permeability oil and gas fields around the world. Due to the limited access to the subsurface, post-treatment assessments are mainly limited to few techniques such as tiltmeter, microseismic, and tracer-logs. The first two techniques are mainly used to determine fracture extension; however, fracture height and fracture initiation at all perforation clusters could only be confirmed through radioactive tracer logs or detailed pressure analysis. In this paper, we consider real examples from a field from Central America and investigate potential problems that led to the limited generation of fractures in multizone treatments. For instance, some of the postfrac radioactive logs show very low concentration of tracers at some perforated zones in comparison with other zones. On the other hand in some cases, tracer logs indicate the presence of tracers in deeper or shallower zones. Different reasons could cause fracture growth in nonperforated zones, including but not limited to: perforation design problems, casing/cement integrity problems, lack of containment, instability of fracture growth in one or some of the zones, and finally making a mistake in selecting lithology for fracturing. In this paper, some of these issues have been examined for a few sample wells using treatment pressure data, petrophysical logs, and postfrac tracer logs. Some recommendations in designing the length and arrangement of perforations to avoid these problems in future fracturing jobs are provided at the end of this paper.Keywords
This publication has 17 references indexed in Scilit:
- How Natural Fractures Could Affect Hydraulic-Fracture GeometrySPE Journal, 2013
- The influence of the cohesive process zone in hydraulic fracturing modellingInternational Journal of Fracture, 2010
- Cohesive zone finite element-based modeling of hydraulic fracturesActa Mechanica Solida Sinica, 2009
- Delamination Onset Prediction in Mechanically Fastened Joints in Composite LaminatesJournal of Composite Materials, 1999
- Effect of strain-dependent cohesive zone model on predictions of crack growth resistanceInternational Journal of Solids and Structures, 1996
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996
- Analysis of Delamination Initiation in Postbuckled Dropped-Ply LaminatesAIAA Journal, 1993
- A comparison of failure criteria to predict delamination of unidirectional glass/epoxy specimens waisted through the thicknessComposites, 1992
- A new combined analytical and finite-element solution method for stability analysis of the growth of interacting tension cracks in brittle solidsInternational Journal of Engineering Science, 1980
- Yielding of steel sheets containing slitsJournal of the Mechanics and Physics of Solids, 1960