Characterization and tribology of PEG‐like coatings on UHMWPE for total hip replacements
Authors:
- 7 May 2009
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 92A (4) , 1500-1509
Abstract
A crosslinked hydrogel coating similar to poly(ethylene glycol) (PEG) was covalently bonded to the surface of ultrahigh molecular weight polyethylene (UHMWPE) to improve the lubricity and wear resistance of the UHWMPE for use in total joint replacements. The chemistry, hydrophilicity, and protein adsorption resistance of the coatings were determined, and the wear behavior of the PEG‐like coating was examined by two methods: pin‐on‐disk tribometry to evaluate macroscale behavior, and atomic force microscopy (AFM) to simulate asperity wear. As expected, the coating was found to be highly PEG‐like, with ∼83% ether content by x‐ray photoelectron spectroscopy and more hydrophilic and resistant to protein adsorption than uncoated UHMWPE. Pin‐on‐disk testing showed that the PEG‐like coating could survive 3 MPa of contact pressure, comparable to that experienced by total hip replacements. AFM nanoscratching experiments uncovered three damage mechanisms for the coatings: adhesion/microfracture, pure adhesion, and delamination. The latter two mechanisms appear to correlate well with wear patterns induced by pin‐on‐disk testing and evaluated by attenuated total reflection Fourier transform infrared spectroscopy mapping. Understanding the mechanisms by which the PEG‐like coatings wear is critical for improving the behavior of subsequent generations of wear‐resistant hydrogel coatings. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res 2010Keywords
This publication has 31 references indexed in Scilit:
- A novel ultra high molecular weight polyethylene–hyaluronan microcomposite for use in total joint replacements. II. Mechanical and tribological property evaluationJournal of Biomedical Materials Research Part A, 2007
- Wear reduction of orthopaedic bearing surfaces using polyelectrolyte multilayer nanocoatingsBiomaterials, 2006
- Protein-mediated boundary lubrication in arthroplastyBiomaterials, 2005
- Improvements of ultra-high molecular weight polyethylene mechanical properties by nitrogen plasma immersion ion implantationBrazilian Journal of Physics, 2004
- Surface grafting of artificial joints with a biocompatible polymer for preventing periprosthetic osteolysisNature Materials, 2004
- Pharmacokinetic and biodistribution properties of poly(ethylene glycol)–protein conjugatesAdvanced Drug Delivery Reviews, 2003
- The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic‐grade polyethyleneJournal of Biomedical Materials Research Part A, 2003
- Nanomechanical properties of energetically treated polyethylene surfacesJournal of Materials Research, 2002
- Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplastyBiomaterials, 1999
- Tribological Properties and Microstructure Evolution of Ultra-High Molecular Weight PolyethyleneJournal of Tribology, 1999