Numerical Simulation on Backfilling of Buried Pipes Using Controlled Low Strength Materials
Open Access
- 7 July 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (14) , 6901
Abstract
The backfill quality of a pipeline has an important influence on pipeline operation. When loose backfill is used, the pipeline may be damaged after short term operation. In this study, the numerical simulation analysis of buried pipes was carried out under three conditions: loose backfill around the pipe, dense backfill, and controlled low strength materials (CLSM) backfill. The effects of narrow trench backfilling using CLSM on the force and deformation of pipelines were studied. The results showed that When CLSM was used for buried pipe backfilling, the pressure on the top of the pipe and on the side of the pipe was significantly reduced. When the surface pressure was 200 kPa, the radial displacement at the top of the pipe was only 0.6 mm. Compared with the dense backfill of the pipe, the radial displacement of the pipe top was reduced by 82.9%, which greatly reduced the deformation of the pipe. CLSM backfilling is a good way to protect the pipeline. The pressure is uniformly applied around the pipe, and the circumferential strain around the pipe is greatly reduced. Pipelines backfilling with CLSM for buried flexible pipes has good mechanical properties and it is expected to be applied to engineering practice.Keywords
Funding Information
- Hubei Provincial Natural Science Foundation of China (2020CFB477)
This publication has 17 references indexed in Scilit:
- Methodology for the design of controlled low-strength materials. Application to the backfill of narrow trenchesConstruction and Building Materials, 2014
- Strength and Stiffness Characterization of Controlled Low-Strength Material Using Native High-Plasticity ClayJournal of Materials in Civil Engineering, 2014
- Flowable Backfill Materials from Bottom Ash for Underground PipelineMaterials, 2014
- Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cementConstruction and Building Materials, 2013
- Use of recycled fine aggregates for Control Low Strength Materials (CLSMs) productionConstruction and Building Materials, 2013
- Study of non-uniform bedding support under continuous PVC water distribution pipesTunnelling and Underground Space Technology, 2013
- Earth pressure measurements on buried HDPE pipeGéotechnique, 2011
- Experimental Investigations of Backfill Conditions on the Performance of High-Density Polyethelene PipesExperimental Techniques, 2011
- Effect of kaolin addition on the performance of controlled low-strength material using industrial waste incineration bottom ashWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Behavior of Buried Flexible Pipe under High Fills and Design ImplicationsJournal of Geotechnical and Geoenvironmental Engineering, 2006