A study on mechanisms of saw-tooth chip formation in hard turning under hybrid nanofluid-assisted MQL environment
Authors:
Open Access
- 29 October 2024
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 16 (10)
Abstract
Saw-tooth chip generated from hard turning is one of the most distinguishing features with conventional turning process. The presented work aims to contribute an extensive understanding the formation mechanism and main parameters of saw-tooth chips in oblique hard turning of 90CrSi hardened tool steel (60–62 HRC). The effects of dry, Al2O3 nanofluid MQL, Al2O3/MoS2 hybrid nanofluid MQL conditions on the serrated chip formation were experimentally investigated in terms of chip morphology, chip color, segment spacing, serrated segmentation frequency, and shear angle. The obtained experimental results indicated that, due to the better cooling and lubricating performance of nanofluid and hybrid nanofluid, the shear angles ϕ increase about 91.73% and 94.88% respectively when compared to dry cutting, which makes the formation of saw-tooth chip more favorable. Moreover, the analysis of microstructure image of the back side of chip proves the better lubrication from ball roller and tribo-film formation of Al2O3 and MoS2 nanoparticles. Based on the chip morphology analysis, the shear angle ϕ, the degree of chip segmentation on the top side in the chip’s transverse section K2, and the chip deformation coefficient in the transverse section K3 should be used as the additional criterions to evaluate the frictional improvement in cutting zone.Keywords
This publication has 41 references indexed in Scilit:
- Optimization of thermophysical properties of nanofluids using a hybrid procedure based on machine learning, multi-objective optimization, and multi-criteria decision-makingChemical Engineering Journal, 2024
- Improved lubrication performance of MoS2-Al2O3 nanofluid through interfacial tribochemistryColloids and Surfaces A: Physicochemical and Engineering Aspects, 2021
- Application of conventional and hybrid nanofluids in different machining processes: A critical reviewAdvances in Colloid and Interface Science, 2020
- Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cuttingThe International Journal of Advanced Manufacturing Technology, 2018
- Chip formation mechanism in dry hard high-speed orthogonal turning of hardened AISI D2 tool steel with different hardness levelsThe International Journal of Advanced Manufacturing Technology, 2017
- Effects of cutting parameters on tool temperatures in intermittent turning with the formation of serrated chip consideredApplied Thermal Engineering, 2017
- The investigation of mechanism of serrated chip formation under different cutting speedsThe International Journal of Advanced Manufacturing Technology, 2015
- Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discsJournal of Mechanical Science and Technology, 2011
- Machining of Hard Materials2011
- An experimental and analytical analysis on chip morphology, phase transformation, oxidation, and their relationships in finish hard millingInternational Journal of Machine Tools and Manufacture, 2009