A 80dB DR 6MHz Bandwidth Pipelined Noise-Shaping SAR ADC with 1–2 MASH structure
Authors:
- 1 March 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
A pipelined NS-SAR ADC with 1–2 MASH structure is presented. Two-stage pipelined structure consisting of 5-bit NS-SAR and 4-bit NS-SAR ADCs shows 3 rd -order noise-shaping. To maximize power efficiency, a single operational transconductance amplifier (OTA) is reused for both an integrator for noise shaping and a residue amplifier for pipelining. The measured DR is 80dB when the sampling rate is 83.3MS/s and bandwidth is 6MHz, and power consumption is 3.5mW showing FoM s,DR of 172.3dB. The proposed ADC structure greatly relaxes design requirement of each SAR quantizer, and can achieve high resolution and wide bandwidth with good power efficiency.Keywords
This publication has 7 references indexed in Scilit:
- A Second-Order Noise-Shaping SAR ADC With Passive Integrator and Tri-Level VotingIEEE Journal of Solid-State Circuits, 2019
- 20.2 A 40MHz-BW 320MS/s Passive Noise-Shaping SAR ADC With Passive Signal-Residue Summation in 14nm FinFET2019
- A 0.029-mm2 17-fJ/Conversion-Step Third-Order CT $\Delta\Sigma$ ADC With a Single OTA and Second-Order Noise-Shaping SAR QuantizerIEEE Journal of Solid-State Circuits, 2018
- A 77dB SNDR 12.5MHz Bandwidth 0–1 MASH ∑Δ ADC Based on the Pipelined-SAR Structure2018
- A 2nd order fully-passive noise-shaping SAR ADC with embedded passive gain2017
- A 9.35-ENOB, 14.8 fJ/conv.-step fully-passive noise-shaping SAR ADC2015
- A 90-MS/s 11-MHz-Bandwidth 62-dB SNDR Noise-Shaping SAR ADCIEEE Journal of Solid-State Circuits, 2012