High‐Temperature Mechanical Properties of Ceramic Materials: IV, Sintered Mullite Bodies
Authors:
- 2 June 1961
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 44 (6) , 284-289
Abstract
An attempt was made to sinter relatively pure 3A1 2 O 3 ‐2SiO 2 and 2A1 2 O 3 ‐SiO 2 compositions to low porosities at 1710° and 1650°C, respectively, using an addition of 1% MgO to each body to facilitate the reaction. The 3A1 2 O 3 ‐2SiO 2 body sintered to a porosity of 7.1% and was practically all mullite. The 2Al 2 O 3 SiO 2 body sintered to a porosity of 10.9% and was composed of mullite and corundum. Strength and elastic modulus measurements were made at several temperatures up to 1200°C, and some observations of the load‐bearing properties were made.Keywords
This publication has 9 references indexed in Scilit:
- The Mullite‐Corundum Boundary in the Systems MgO‐Al 2 O 3 ‐SiO 2 and CaO‐Al 2 O 3 ‐SiO 2Journal of the American Ceramic Society, 1959
- High‐Temperature Mechanical Properties of Ceramic Materials: II, Beta‐EucryptiteJournal of the American Ceramic Society, 1959
- Young's Modulus of Various Refractory Materials as a Function of TemperatureJournal of the American Ceramic Society, 1959
- Studies in Lithium Oxide Systems: III, Liquid Immiscibility in the System Li 2 O‐B 2 O 3 ‐SiO 2Journal of the American Ceramic Society, 1959
- Einlagerungsversuche an synthetischem Mullit und Substitutionsversuche mit Galliumoxyd und Germaniumdioxyd Teil IIArchiv für das Eisenhüttenwesen, 1958
- High‐Temperature Mechanical Properties of Ceramic Materials: I, Magnesium DititanateJournal of the American Ceramic Society, 1958
- Sonic Analysis for Solid BodiesJournal of the American Ceramic Society, 1953
- Elastic and Flow Properties of Dense, Pure Oxide RefractoriesJournal of the American Ceramic Society, 1951
- THE THERMAL EXPANSION OF SOME REFRACTORY OXIDES 1Journal of the American Ceramic Society, 1931