Dynamic mechanical properties of some polyurethane‐acrylic copolymer interpenetrating polymer networks
Authors:
- 1 February 1985
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 25 (3) , 157-163
Abstract
Dynamic mechanical properties have been investigated for interpenetrating‐network systems based on polyol‐cured polyurethanes (PU) and 2 to 1 n‐butyl acrylate‐n‐butyl methacrylate (Ac) networks. The systems were formed simultaneously (SIN) from all of the precursors and reactants for both networks in the same vessel, and sequentially (SIPN) by swelling a precured PU with the reactants that will form the Ac network. If the Ac network is formed after gelation of the PU, the IPNs are transparent and appear to have single T (tan δmax) between those of the homonetworks; visible‐phase separation occurs if the Ac is intentionally polymerized prior to PU gelation. Damping curves were lower and broader and the T (tan δmax) and rubber moduli were higher for the SIN than for the SIPN systems. Up to 65 percent Ac, the T (tan δmax) data for both SIN and SIPN fit the Gordon‐Taylor equation if a T (tan δmax) for the Ac homonetwork 7°C higher than observed is used, suggesting a higher crosslink density for the Ac network under these conditions. The differences in properties of the SIN and SIPN are assumed to be dependent on sample homogeneity and upon the presence of a tin catalyst in the SIN preparation. This can result in limited Ac‐network formation and consequent phase separation before PU gelation has occurred, and the catalyst may also increase the extent of interaction, such as grafting or hydrogen‐bond formation between the networks.Keywords
This publication has 17 references indexed in Scilit:
- Semi‐ and fully interpenetrating polymer networks based on polyurethane–polyacrylate systems. I. The polyurethane networksJournal of Applied Polymer Science, 1983
- Polyurethane-poly(methyl methacrylate) interpenetrating polymer networks: 1. Early steps and kinetics of network formation; intersystem graftingPolymer, 1983
- Miscibility of polycaprolactone/chlorinated polyethylene blendsJournal of Polymer Science: Polymer Physics Edition, 1982
- Interpenetrating Polymer Networks and Related Materials1981
- Polyurethane Interpenetrating Polymer Networks. 3. Viscoelastic Properties of Polyurethane-Poly(methyl methacrylate) Interpenetrating Polymer NetworksMacromolecules, 1977
- Polyurethane interpenetrating polymer networks. V. Engineering properties of polyurethane–poly(methyl methacrylate) IPN'sJournal of Applied Polymer Science, 1977
- Polyurethane Interpenetrating Polymer Networks. II. Density and Glass Transition Behavior of Polyurethane-Poly(methyl methacrylate) and Polyurethane-Polystyrene IPN'sMacromolecules, 1976
- Polyurethane Interpenetrating Polymer Networks. I. Synthesis and Morphology of Polyurethane-Poly(methyl methacrylate) Interpenetrating Polymer NetworksMacromolecules, 1976
- Measuring the dynamic moduli of glassy polymers: analysis of the RheovibronJournal of Applied Physics, 1973
- Ideal copolymers and the second‐order transitions of synthetic rubbers. i. non‐crystalline copolymersJournal of Chemical Technology & Biotechnology, 1952