Detection of Inner Cracks in Thick Steel Plates Using Unsaturated AC Magnetic Flux Leakage Testing With a Magnetic Resistance Gradiometer
- 9 June 2017
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
Abstract
In order to ensure the safety of infrastructure, it is important to be able to detect both surface and inner cracks in the thick steel plates used. However, it is difficult to use conventional magnetic measurement techniques for inspecting inner cracks in steel because of its high permeability as well as owing to the variations in it. To solve this problem, we developed a method called unsaturated ac magnetic flux leakage (MFL) testing based on a magnetic resistance gradiometer for analyzing the inner cracks in steel. The proposed method uses a sensor probe consisting of a semicircular yoke with induction coils at each end, and a gradiometer with two anisotropic magnetic resistance sensors for detecting the components perpendicular to the steel surface. The conventional MFL testing method requires a strong power source for observing the MFL in the magnetic saturation region. In contrast, in this paper, a gradiometer-based method for detecting the differential intensity and phase is used to detect low levels of magnetic leakage using a weak power source when the test steel sample is unsaturated. During the measurements, a deep inner crack could be detected by decreasing the frequency. The line-scanned differential signal exhibited a peak just above the crack position and was observed to be depth dependent. Based on these results, the method could be used to determine the position of the crack as well as its depth.Keywords
Funding Information
- Japan Science and Technology Agency (Cross-ministerial Strategic Innovation Promotion P)
This publication has 10 references indexed in Scilit:
- Detection of Inner Corrosion of Steel Construction Using Magnetic Resistance Sensor and Magnetic Spectroscopy AnalysisIEEE Transactions on Magnetics, 2016
- Theory and Application of Magnetic Flux Leakage Pipeline DetectionSensors, 2015
- Automatic Scanning System for Back-Side Defect of Steel Structure Using Magnetic Flux Leakage MethodIEEE Transactions on Magnetics, 2015
- Magnetic mechanisms of magnetic flux leakage nondestructive testingApplied Physics Letters, 2013
- A magnetic flux leakage method using a magnetoresistive sensor for nondestructive evaluation of spot weldsNDT & E International, 2011
- Detection of back-side pit on a ferrous plate by magnetic flux leakage method with analyzing magnetic field vectorNDT & E International, 2010
- Magnetic thickness gauge using a Fourier transformed eddy current techniqueNDT & E International, 2009
- Fourier-transformed eddy current technique to visualize cross-sections of conductive materialsNDT & E International, 2007
- Magnetic property mapping system for analyzing three-dimensional magnetic componentsReview of Scientific Instruments, 2006
- New findings in the field of non-destructive magnetic leakage field inspectionNDT International, 1986