Optimization of Thermo-Mechanical Processing for Forging of Newly Developed Creep-Resistant Magnesium Alloy ABaX633
Open Access
Abstract
The compressive strength and creep resistance of cast Mg-6Al-3Ba-3Ca (ABaX633) alloy has been measured in the temperature range of 25 to 250 °C, and compared with that of its predecessor ABaX422. The alloy is stronger and more creep-resistant than ABaX422, and exhibits only a small decrease of yield stress with temperature. The higher strength of ABaX633 is attributed to a larger volume fraction of intermetallic particles (Al, Mg)2Ca and Mg21Al3Ba2 in its microstructure. Hot deformation mechanisms in ABaX633 have been characterized by developing a processing map in the temperature and strain rate ranges of 300 to 500 °C and 0.0003 to 10 s−1. The processing map exhibits two workability domains in the temperature and strain rate ranges of: (1) 380 to 475 °C and 0.0003 to 0.003 s−1, and (2) 480–500 °C and 0.003 to 0.5 s−1. The apparent activation energy values estimated in the above two domains (204 and 216 kJ/mol) are higher than that for lattice self-diffusion of Mg, which is attributed to the large back-stress that is caused by the intermetallic particles. Optimum condition for bulk working is 500 °C and 0.01 s−1 at which hot workability will be maximum. Flow instability is exhibited at lower temperatures and higher strain rates, as well as at higher temperatures and higher strain rates. The predictions of the processing map on the workability domains, as well as the instability regimes are fully validated by the forging of a rib-web (cup) shaped component under optimized conditions.Keywords
This publication has 13 references indexed in Scilit:
- Compression-creep response of magnesium alloy DieMag422 containing barium compared with the commercial creep-resistant alloys AE42 and MRI230DMaterials Science and Engineering: A, 2013
- Compressive strength and hot deformation mechanisms in as-cast Mg-4Al-2Ba-2Ca (ABaX422) alloyPhilosophical Magazine, 2013
- Creep Behaviour Under Compressive Stresses of Calcium and Barium Containing Mg-Al-based Die Casting AlloysMaterials Science Forum, 2013
- Materials modeling and finite element simulation of isothermal forging of electrolytic copperMaterials & Design (1980-2015), 2011
- Creep resistance in magnesium alloysInternational Materials Reviews, 2010
- Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950°CMaterials Science and Engineering: A, 2005
- Modelling of hot deformation for microstructural controlInternational Materials Reviews, 1998
- Prediction of a {1122} hcp stacking fault using a modified generalized stacking-fault calculationPhilosophical Magazine A, 1997
- On the stacking fault energies of some close-packed hexagonal metalsScripta Metallurgica, 1969
- Strength and structure under hot-working conditionsInternational Materials Reviews, 1969