Quality of the Pellets Obtained with Wood and Cutting Residues of Stone Pine (Pinus pinea L.)
Open Access
Abstract
The use of wood and residual biomass from forestry works is a CO2 emission-neutral source of energy that also contributes to reducing the risk of spreading forest fires, especially under Mediterranean climate. The forest stands of stone pine (Pinus pinea L.) occupies about 0.7 million hectares in the Mediterranean basin. In this study, the commercial quality of the pellets manufactured from different types of cutting residues (needles and thin branches, medium branches and bark), as well as wood from trunks and thick branches, was assessed. It was concluded that with the exclusive use of residual biomass it is not possible to obtain pellets of high commercial quality, useful for residential or industrial use. However, the highest quality pellets could be obtained by combining them with stone pine debarked wood, but in a certain proportion that differs depending on the type of residue (around 15% for bark, 30% for medium branches and less than 15% for needles and thin branches). It is recommended to take advantage of both the thick wood (trunk + thick branches) and a proportion of medium branches and bark, while in the case of needles and thinnest branches it would be more convenient to leave them in the forest for their incorporation into the soil, given their high nutrients concentration and their low quality for energetic use. The results found support a greater valorization of the biomass obtained in the stone pine fellings. In the future it will be necessary to study which is the most appropriate logistics of the silvicultural works to be able to conveniently apply the results of this study.Keywords
Funding Information
- “Iberian Center for Research and Forest Firefighting”, CILIFO (0753_CILIFO_5_E, 0756_FIREPOCTEP_6_E)
- Strengthening of cross-border systems for the prevention and extinction of forest fires and improvement of resources for rural employment generation post COVID-19”, FIREPOCTEP (0753_CILIFO_5_E, 0756_FIREPOCTEP_6_E)
- European Regional Development Fund (ERDF) (0753_CILIFO_5_E, 0756_FIREPOCTEP_6_E)
This publication has 43 references indexed in Scilit:
- Combustion and emission characteristics of a domestic boiler fired with pellets of pine, industrial wood wastes and peach stonesRenewable Energy, 2013
- Influence of process parameters and biomass characteristics on the durability of pellets from the pruning residues of Olea europaea L.Biomass and Bioenergy, 2011
- Factors affecting strength and durability of densified biomass productsBiomass and Bioenergy, 2009
- NIR techniques create added values for the pellet and biofuel industryBioresource Technology, 2009
- Objectives and considerations for wildland fuel treatment in forested ecosystems of the interior western United StatesForest Ecology and Management, 2008
- Experimental Verification of Novel Pellet Model Using a Single Pelleter UnitEnergy & Fuels, 2007
- Effect of raw material composition in woody biomass pellets on combustion characteristicsBiomass and Bioenergy, 2007
- Industrial processes for biomass drying and their effects on the quality properties of wood pelletsBiomass and Bioenergy, 2004
- Inter-regional variability in site index models for even-aged stands of stone pine (Pinus pinea L.) in SpainAnnals of Forest Science, 2003
- Storage effects on pelletised sawdust, logging residues and barkBiomass and Bioenergy, 2000