Models for ultrasonic characterization of environmental degradation of interfaces in adhesive joints
Authors:
- 15 October 1994
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 76 (8) , 4643-4650
Abstract
In this paper we discuss two models of environmental degradation of adhesive joints developed from experimental observation of the joint failure mode. It is found that after severe degradation, failure is dominated by the interfacial mode, i.e., by failure at the interface between adhesive and adherend. The fraction of failure in the interfacial mode was found to be related to the joint strength and to be proportional to the frequency shift of a minimum in the spectrum of the reflected ultrasonic signal. One model considers an interface as an interphase in the form of a nonhomogeneous layer composed of two phases: ‘‘soft’’ which is viscoelastic (degraded part of the interphase) and ‘‘stiff’’ corresponding to the nondamaged interphase. Increase of the ‘‘soft’’ phase fraction corresponds to the process of degradation in the interphase. The second model describes degradation in a form of disbonds filled by absorbed water at the interface. The disbonded interface is modeled by transverse spring boundary conditions, with the complex spring stiffness representing the quality of the bond. The influence of different disbond growth scenarios is considered. Advantages and drawbacks of these models are discussed.Keywords
This publication has 15 references indexed in Scilit:
- The role of electron microscopy in the study of adhesion to aluminium substratesSurface and Interface Analysis, 1993
- Ultrasonic Evaluation of Environmental Durability of Adhesive JointsResearch in Nondestructive Evaluation, 1993
- Analysis of boundary conditions for elastic wave interaction with an interface between two solidsThe Journal of the Acoustical Society of America, 1991
- Evaluation of interfacial properties in adhesive joints of aluminum alloys using angle-beam ultrasonic spectroscopyJournal of Adhesion Science and Technology, 1991
- Past experiences in the development of tests for adhesive bond strengthJournal of Adhesion Science and Technology, 1991
- Study of adhesive bonds using low-frequency obliquely incident ultrasonic wavesThe Journal of the Acoustical Society of America, 1986
- An ultrasonic interface-wave method for predicting the strength of adhesive bondsJournal of Applied Physics, 1981
- A theoretical model for the attenuation and dispersion of stoneley waves at the loosely bonded interface of elastic half spacesPhysics of the Earth and Planetary Interiors, 1975
- Dynamic elastic moduli of a suspension of imperfectly bonded spheresMathematical Proceedings of the Cambridge Philosophical Society, 1974
- Waves at a Flexibly Bonded InterfaceJournal of Applied Mechanics, 1967