Determination of the corrosion products of iron in sea water with and without sulphides
Authors:
- 1 February 1983
- journal article
- Published by Wiley in Materials and Corrosion
- Vol. 34 (2) , 78-83
Abstract
A method was developed to characterize and quantify iron corrosion products in clean and sulphide polluted sea water. This method is based upon a selective dissolution with suitable reagents (methanol, glycine, bromine‐methanol, hydrochloric acid etc.) of the various compounds and the subsequent chemical analysis of the various dissolved elements. The information thus obtained is integrated by a diffractometric X‐ray analysis.The following corrosion products were found: Fe(OH)2 = Fe3O4 − FeO(OH) − Fe2O3 + unidentified compound Cr (probably oxychloride) in sea water with pH = 8.1 having a 7 ppm D.O. content. FeOC1 − Fe(OH)2 − Fe3O4 − FeO.OH in partially deoxygenated sea water (D.O. = 3 ppm) at pH 8.1;Fe0.95S − Fe(OH)2 in sea water at pH = 7 with 10 ppm of sulphides;Fe0.95S − FeS − Fe3.6 · Fe0.9(O · OH · C1) and FeOC1 − iron oxisulphide − Fe3O4 − FeO(OH) − Fe2O3 · H2O in sea water at pH = 7 and 10 ppm initial sulphides left to oxidate.Since the method of chemical analysis thus developed supplies quantitative information in iron distribution among the various anions and on the various oxidation forms, it is deemed a useful tool for investigation of the corrosion kinetics and mechanism.Keywords
This publication has 22 references indexed in Scilit:
- Studies in chemical phase analysis. Part II. Determination of the solubilities of carbides, nitrides, oxides and sulphides in certain organic solvent-bromine mixturesThe Analyst, 1981
- Electrochemical behavior and corrosion of iron in aqueous sulfidic solutionMaterials and Corrosion, 1980
- The Formation of Ferrous Monosulfide Polymorphs during the Corrosion of Iron by Aqueous Hydrogen Sulfide at 21°CJournal of the Electrochemical Society, 1980
- Estimation of metallic iron in rusted sponge-iron: Dissolution of iron oxides by bromine/methanolTalanta, 1978
- Apparent dissociation constants of hydrogen sulfide in chloride solutionsMarine Chemistry, 1975
- The region of stability of green rust II in the electrochemical potential-pH equilibrium diagram of iron in sulphate mediumCorrosion Science, 1975
- The mechanism of formation of iron oxide and oxyhydroxides in aqueous solutions at room temperatureCorrosion Science, 1974
- Korrosionsproduktuntersuchung durch Röntgenfeinstrukturanalyse und ThermogravimetrieMaterials and Corrosion, 1973
- A study of some products of the corrosion of Fe under hydrothermal conditions using the Mössbauer effectCorrosion Science, 1971
- Mössbauer spectra of some iron compounds formed from alkaline solutionsCorrosion Science, 1971