A LiPF6-LiFSI Blended-Salt Electrolyte System for Improved Electrochemical Performance of Anode-Free Batteries
Open Access
- 28 February 2022
- journal article
- research article
- Published by The Korean Electrochemical Society - English Journal in Journal of Electrochemical Science and Technology
- Vol. 13 (1) , 78-89
Abstract
ANODE-free Li-metal batteries (AFLMBs) operating with Li of cathode material have attracted enormous attention due to their exceptional energy density originating from anode-free structure in the confined cell volume. However, uncontrolled dendritic growth of lithium on a copper current collector can limit its practical application as it causes fatal issues for stable cycling such as dead Li formation, unstable solid electrolyte interphase, electrolyte exhaustion, and internal short-circuit. To overcome this limitation, here, we report a novel dual-salt electrolyte comprising of 0.2 M LiPF6 + 3.8 M lithium bis(fluorosulfonyl) imide in a carbonate/ester co-solvent with 5 wt% fluoroethylene carbonate, 2 wt% vinylene carbonate, and 0.2 wt% LiNO3 additives. Because the dual-salt electrolyte facilitates uniform/dense Li deposition on the current collector and can form robust/ionic conductive LiF-based SEI layer on the deposited Li, a Li/Li symmetrical cell exhibits improved cycling performance and low polarization for over 200 h operation. Furthermore, the anode-free LiFePO4/Cu cells in the carbonate electrolyte shows significantly enhanced cycling stability compared to the counterparts consisting of different salt ratios. This study shows an importance of electrolyte design guiding uniform Li deposition and forming stable SEI layer for AFLMBs.Keywords
Funding Information
- Korea Electrotechnology Research Institute (21A01009)
- National Research Council of Science & Technology
- National Research Foundation of Korea (2018M1A2A2063343)
- Ministry of Science and ICT
- Research Institute of Industrial Science & Technology
This publication has 43 references indexed in Scilit:
- Ordered Mesoporous Titanium Nitride as a Promising Carbon-Free Cathode for Aprotic Lithium-Oxygen BatteriesACS Nano, 2017
- Progress in electrolytes for rechargeable Li-based batteries and beyondGreen Energy & Environment, 2016
- Initiated Chemical Vapor Deposition (iCVD) of Highly Cross-Linked Polymer Films for Advanced Lithium-Ion Battery SeparatorsACS Applied Materials & Interfaces, 2015
- Effect of Mixtures of Lithium Hexafluorophosphate (LiPF6) and Lithium Bis(fluorosulfonyl)imide (LiFSI) as Salts in Li[Ni1/3Mn1/3Co1/3]O2/Graphite Pouch CellsJournal of the Electrochemical Society, 2014
- Synergistic effect between lithium bis(fluorosulfonyl)imide (LiFSI) and lithium bis-oxalato borate (LiBOB) salts in LiPF6-based electrolyte for high-performance Li-ion batteriesElectrochimica Acta, 2014
- LiFSI vs. LiPF6 electrolytes in contact with lithiated graphite: Comparing thermal stabilities and identification of specific SEI-reinforcing additivesElectrochimica Acta, 2013
- Robust Cycling of Li-O2Batteries through the Synergistic Effect of Blended ElectrolytesChemSusChem, 2013
- Corrosion/passivation of aluminum current collector in bis(fluorosulfonyl)imide-based ionic liquid for lithium-ion batteriesElectrochemistry Communications, 2012
- Lithium bis(fluorosulfonyl)imide (LiFSI) as conducting salt for nonaqueous liquid electrolytes for lithium-ion batteries: Physicochemical and electrochemical propertiesJournal of Power Sources, 2011
- LiPF6–EC–EMC electrolyte for Li-ion batteryJournal of Power Sources, 2002