Closed-Loop Controller for Eliminating the Contact Bounce in DC Core Contactors
Authors:
- A. G. EspinosaAEA. G. Espinosa
- J R RibaJ R Riba
- J A OrtegaJOJ A Ortega
Open Access
- 21 June 2010
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 33 (3) , 535-543
Abstract
The undesirable phenomenon of the contact bounce causes severe erosion of the contacts and, as a consequence, their electrical life and reliability are greatly reduced. On the other hand, the bounce of the armature can provoke re-opening of the contacts, even when they have already been closed. This paper deals with the elimination of the bounce in both contacts and armature of a commercial dc core contactor. This is achieved by means of a current closed-loop controller, which only uses as input the current and voltage of the contactor's magnetizing coil. The logic control has been implemented in a low cost microcontroller. Moreover, the board control can be fed by either dc or ac, and either in 50 Hz or 60 Hz so as to extend its applicability. A set of data is obtained from the measurement of the position and velocity of the movable parts for different operating voltages, and the dynamic behavior of the contactor is discussed.Keywords
This publication has 22 references indexed in Scilit:
- A Novel Parametric Model for AC ContactorsIEEE Transactions on Magnetics, 2008
- Micro-Arcing and Arc Erosion Minimization Using a DC Hybrid Switching DeviceIEEE Transactions on Components and Packaging Technologies, 2008
- Dynamic Characteristic and Contact Bounce Analysis for an AC Contactor with PWM Controlled Coil2007
- A Study of Closing Adaptive Control in Electronically Controlled Intelligent Contactor2006
- An investigation for the method of lifetime prediction of Ag-Ni contacts for electromagnetic contactor2005
- Simulation of spring system's operation process for electromagnetic relay2004
- AC contactor making speed measuring and theoretical analysis2004
- An approach to the reduction of contact bounce using fuzzy control2003
- Towards the control of contact bounceIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1996
- Pulse-width-modulating control of a nonlinear electromagnetic actuatorIEEE Transactions on Industrial Electronics, 1990