Ozonation of Pulp Mill Effluent Prior to Activated Sludge Treatment

Authors:
  • TTT. Tuhkanen
    T. Tuhkanen
  • MNM. Naukkarinen
    M. Naukkarinen
  • SBS. Blackburn
    S. Blackburn
  • HTH. Tanskanen
    H. Tanskanen

Abstract
The paper and pulp industry have been the main pollutant of Finnish water bodies, but extensive investments have been made into improving internal and external purification. Activated sludge plants have been the most common waste water treatment method, but they are sensitive to shock loading and toxicity and their capacity to remove poorly biodegradable or toxic substances is limited. In this study pre-ozonation was investigated in order to prevent process failure, to improve the purification efficiency and to increase the removal rate of aquatic toxicity of the waste water. The ozonation of the most toxic paper and pulp mill effluent stream, bleaching effluent with the ozone dose, 0.4 MgO3 mg CODCr−1, increased the biodegradability measured as BOD/COD ratio by converting COD to BOD. This resulted in an increase in overall treatment efficiencies of up to 91 % BOD removal, 85% COD removal, compared to 22–60% BOD and 47–62 % COD without pre-ozonation. Pre-ozonation also helped to prevent process failure caused by bulking of sludge. Pre-ozonation combined with biological treatment was effective in the removal of acute aquatic toxicity measured by luminescent bacteria or water flea which had not been removed by biological or chemical treatment alone.