High-Resolution Reflection Electron Microscopy of Si(111)7×7 Surfaces Using a High-Voltage Electron Microscope
Authors:
- Hideki KoikeHKHideki Koike
- Kunio KobayashiKKKunio Kobayashi
- Soh-Ichiro OzawaSOSoh-Ichiro Ozawa
- Katsumichi YagiKYKatsumichi Yagi
- 1 May 1989
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 28 (5R)
Abstract
High-resolution reflection electron microscope (REM) observations of Si(111)7×7 surfaces have been carried out by means of an ultra-high-vacuum 1 MV microscope. An advantage to the use the high-resolution 1 MV microscope is the reduction of resolution degradation due to chromatic aberration. When the observations are carried out along the [11̄0] direction, 2.3 nm lattice fringes of the 7×7 unit cell size are observed. When several beams are included in the objective aperture, finer fringes, i.e., three fringes and seven fringes in 2.3 nm, are observed. The fact that the former fine fringes are frequently observed instead of half-spacing fringes of the 2.3 nm fringes seems to suggest that the fringes reflect the 7×7 reconstructed structure. The latter fine fringes are the narrowest fringes with spacing of 0.33 nm so far recorded in REM. When Au is deposited to form the 5×2 adsorbate structure, fringes of the half spacing of the 5 period are recorded. This may reflect the adsorbate structure, a conclusive model of which has not been reported.Keywords
This publication has 17 references indexed in Scilit:
- Structure of submonolayer gold on silicon (111) from x-ray standing-wave triangulationPhysical Review B, 1988
- Surface Structures Observed by High-Resolution UHV Electron Microscopy at Atomic LevelJapanese Journal of Applied Physics, 1987
- UHV-REM Study of Changes in the Step Structures on Clean (100) Silicon Surfaces by AnnealingJapanese Journal of Applied Physics, 1987
- Observation of lattice fringes of the Si(111)–7×7 structure by reflection electron microscopy*Journal of Microscopy, 1986
- Atomic Resolution TEM Images of the Au(001) Reconstructed SurfaceJapanese Journal of Applied Physics, 1986
- Reflection electron microscope study of the initial stages of oxidation of Si(111)-7 × 7 surfacesUltramicroscopy, 1985
- Tunneling Images of Atomic Steps on the Si(111)7×7 SurfacePhysical Review Letters, 1985
- Reflection electron microscopy (REM) of vicinal surfaces of fcc metalsUltramicroscopy, 1983
- Electron energy loss spectriscopy in glancing reflection from bulk crystalsUltramicroscopy, 1983
- A New Structure Model for the Si(111) 7×7 Surface StructureJapanese Journal of Applied Physics, 1980