Dry Deep Drawing of Aluminum and the Influence of Sheet Metal Roughness
Open Access
- 30 April 2020
- journal article
- research article
- Published by Springer Nature in JOM
- Vol. 72 (7) , 2511-2516
Abstract
Dry forming processes are associated with major challenges, especially when it comes to aluminum as the workpiece material. Major losses in process quality and robustness occur when lubricants are spared. This is due to the high adhesion tendency of aluminum towards common tool materials. Nanoscopically smooth coatings based on amorphous hydrocarbons (a-C:H) can significantly reduce wear. Further preliminary investigations have shown that a reduction of the roughness of a mill-finished sheet results in a significant improvement with regard to the friction and wear behavior in the strip drawing test. These tests are now transferred to a real workpiece. First, the different zones of the deep drawing process are modeled in the strip drawing test and coefficients of friction are derived. Flawless deep drawing tests can be carried out with nanoscopically smooth a-C:H coatings. By polishing the sheets and using the a-C:H coated tools without further surface treatment, the dry friction and wear are reduced, but compared with experiments on smoothened a-C:H coatings, the necessary process forces are higher and may lead to rupture of the aluminum sheet.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (Projekt number 390892986)
This publication has 18 references indexed in Scilit:
- Technical, Economic and Environmental Review of the Lubrication/Cooling Systems Used in Machining ProcessesProcedia Engineering, 2017
- Handbuch Maschinenbau2017
- Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304Journal of Cleaner Production, 2016
- Potential of alternative lubrication strategies for metal cutting processes: a reviewThe International Journal of Advanced Manufacturing Technology, 2016
- Dry forming of aluminum alloys – Wear mechanisms and influencing factorsMaterialwissenschaft und Werkstofftechnik, 2015
- History of diamond-like carbon films — From first experiments to worldwide applicationsSurface and Coatings Technology, 2014
- Tribology of Diamond-Like Carbon Films2008
- Abrasive wear testing of DLC coatings deposited on plane and cylindrical partsSurface and Coatings Technology, 2003
- Friction and wear properties in dry, water- and oil-lubricated DLC against alumina and DLC against steel contactsWear, 1998
- Carbon-based coatings for dry sheet-metal workingSurface and Coatings Technology, 1998