Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy
- 6 April 2016
- journal article
- research article
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 35 (5) , 541-546
Abstract
This paper presents the mechanical and tribological characteristics of the NiTi shape memory alloy (SMA) fabricated by powder metallurgy. This material has prominent applications in micro-electromechanical systems, medical implants, actuator, space and aerospace industries, etc. In every field, wear characteristics plays a dominating role. In present work dry-abrasion wear behavior is determined for NiTi alloy by varying binder percentage. With increasing binder percentage from 2.5 to 15 %, density decreases from 6.5 to 5.3 g/cm3 while porosity increases from 19 % to 51 %. Increasing rotational speed and binder percentage at a constant load the wear rate increases in the NiTi alloy. Due to the presence of hard particles, NiTi exhibits a very small wear rate. The coefficient of friction is also computed for the alloys in present research work. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction were used for the investigation of surface morphology and phases in the NiTi alloy.Keywords
This publication has 14 references indexed in Scilit:
- Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubesJournal of Alloys and Compounds, 2014
- The tribocorrosion behaviour of NiTi alloyApplied Surface Science, 2014
- Synthesis of Nanograined Ti-Al-Cr-Nb-X [X = Ni-P-Coated Graphite and Carbon] Intermetallic Matrix Composites by Mechanical AlloyingParticulate Science and Technology, 2013
- Biomedical Applications of Shape Memory AlloysJournal of Metallurgy, 2011
- Wear resistance of NiTi alloy after surface mechanical attrition treatmentSurface and Coatings Technology, 2010
- Porous NiTi for bone implants: A reviewActa Biomaterialia, 2008
- Cavitation erosion of plasma-sprayed NiTi coatingsWear, 2006
- Fabrication methods of porous metals for use in orthopaedic applicationsBiomaterials, 2006
- PM Processing of Single-Phase NiTi Shape Memory Alloys by VPCR ProcessMATERIALS TRANSACTIONS, 2006
- Microfluidic Large-Scale IntegrationScience, 2002