Synthesis and properties of reed-based polyurethane (PU) coating
- 2 September 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 44 (9) , 615-623
Abstract
The reuse of agricultural waste and the development of bio-based materials are the main strategies for solving the global energy crisis and environmental problems. Agricultural waste reeds containing natural nano-silica (SiO2) were liquefied with PEG-400, Castor oil, and acid to produce reed-based polyols (R–P). The result shows that the liquefied product is a polyol with a hydroxyl value of 171 mgKOH/g, a viscosity of 1.221 Pa S, the number average molecular weight (Mn) of 1.202 kg/mol. Then reed-based two-component polyurethane emulsion (R-T-PU) and reed-based one-component waterborne polyurethane emulsion (R-O-WPU) with good glossiness and excellent mechanical properties were prepared. Because of the natural nano-SiO2 in reed and castor oil, the coatings exhibit excellent mechanical properties and hydrophobicity. The results show that the series of reed-based polyurethane has excellent mechanical properties, a maximum hardness of 6H, good hydrophobic effect, a maximum contact angle of 109°, high thermal stability, and a maximum initial decomposition temperature can reach 299.1 °C. Therefore, the environmental protection bio-based polyurethane coating with excellent properties can be prepared with the reed, which is expected to replace fossil resources. It provides an experimental basis for the high-added-value utilization of reed.Keywords
Funding Information
- Hebei Provincial Key Laboratory of Analytical Science and Technology (22567620H)
- the multidisciplinary research project of Hebei University (DXK202003)
- Higher Education Science and Technology Research Project of Hebei Province, China (ZD2019022)
- Science and technology projects of Baoding (1911Q002)
This publication has 38 references indexed in Scilit:
- Synthesis of castor oil‐based polyols applicable in acrylated polyurethane coating with improved mechanical propertiesPolymer International, 2022
- Facile synthesis of a castor oil‐based hyperbranched acrylate oligomer and its application in UV‐curable coatingsJournal of Applied Polymer Science, 2020
- Development of biobased polyurethane‐imides from maleinized cottonseed oil and castor oilPolymers for Advanced Technologies, 2019
- Bio‐Based Polyurethanes from Microbially Converted Castor OilJournal of the American Oil Chemists' Society, 2019
- Synthesis and characterization of petroleum and biobased epoxy resins: a reviewPolymer International, 2018
- Renewability is not Enough: Recent Advances in the Sustainable Synthesis of Biomass‐Derived Monomers and PolymersChemistry – A European Journal, 2016
- Ethylene Carbonate used as Reagent and Green Solvent in the Chemical Modification of CorncobMacromolecular Materials and Engineering, 2015
- Porous poly(ethylene glycol)–polyurethane hydrogels as potential biomaterialsPolymer International, 2014
- Polyols and Polyurethanes from the Liquefaction of Lignocellulosic BiomassChemSusChem, 2013
- Fast liquefaction of bagasse in ethylene carbonate and preparation of epoxy resin from the liquefied productJournal of Applied Polymer Science, 2005