Medium-scale laboratory model of mono-bucket foundation for installation tests in sand
Authors:
- 1 August 2019
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 56 (8) , 1142-1153
Abstract
Design implications of suction installation of bucket foundations are still not well understood. During suction installation, applied suction under the bucket lid results in seepage flow through the surrounding sand. Seepage flow plays a pivotal role in reducing the penetration resistance, allowing for full penetration despite the initial large soil resistance. However, loosening of the inside soil plug might be problematic when the soil approaches its failure stage, due to soil piping or extensive soil heave inside the bucket foundation. To better understand the interaction between the soil and bucket skirt during suction installation, this paper describes the results of medium-scale tests of bucket foundation installations in sand, comparing jacking and suction installations. Experimental measurements of the pore pressure around the bucket skirt are compared with the numerical simulation results, to validate the finite-element model and to enable analysis of the soil behavior around the skirt.Keywords
This publication has 7 references indexed in Scilit:
- Large-scale experimental investigation of the installation of suction caissons in silt sandApplied Ocean Research, 2016
- Soil conditions and bounds to suction during the installation of caisson foundations in sandOcean Engineering, 2014
- Laboratory tests on soil–skirt interaction and penetration resistance of suction caissons during installation in sandOcean Engineering, 2014
- CPT-Based Method for the Installation of Suction Caissons in SandJournal of Geotechnical and Geoenvironmental Engineering, 2009
- Variation of suction pressure during caisson installation in sandGéotechnique, 2008
- Penetration Resistance of Offshore Skirted Foundations and Anchors in Dense SandJournal of Geotechnical and Geoenvironmental Engineering, 2008
- Design procedures for installation of suction caissons in sandProceedings of the Institution of Civil Engineers - Geotechnical Engineering, 2005