Relevance. Despite the long history of limb amputation surgery, the timing and magnitude of mechanical loading of stumps have not yet been clarified. The aim of the study was to investigate the optimal timing and magnitude of mechanical loading of bone stumps after amputation. Methods. Two series of experiments were conducted on 18 rabbits with amputation of the thigh in the middle third and myoplasty. In the control series, after 4, 8, and 16 weeks, cyclic mechanical loading was applied to the end of the bone stump with an energy of 0.5 mJ/mm2 at a frequency of 2 Hz, with 400 pulses per session. In the experimental series, at the same time intervals, the load was applied twice a day at 200 pulses per session. The observation periods were 6, 10, and 18 weeks. The research method was histological with vessel filling with a 10% gelatin mixture. Results. In the control series, most experiments showed pathological remodelling of bone tissue with the development of atrophy, bone shape distortion, bone curvature, and stress fractures. In the experimental series, organotypic stumps were formed with normalisation of structure and microcirculation. The best results of bone tissue remodelling were obtained in the series with the onset of mechanical loads in both series at 10 weeks, 8 weeks after amputation. Conclusion. Mechanical daily loading of the bone stump with energy of 0.5 mJ/mm2, frequency of 2 Hz, with 400 pulses per session at 4, 8, and 16 weeks causes significant disturbances in bone remodelling with the formation of cone-shaped and spindle-shaped stumps, deviation of the end from the axis, and stress fractures. The same load (0.5 mJ/mm2, frequency 2 Hz, 400 pulses) divided into two sessions per day of 200 pulses with an interval of 4 hours contributes to the formation of an organotypic cylindrical shape of the stump with a balance of resorptive and reparative processes. The start of mechanical loads 8 weeks after amputation does not cause significant disturbances in the remodelling of the bone tissue of the stump and is the most optimal.