Boundary Layer Development in the BR710 and BR715 LP Turbines—The Implementation of High-Lift and Ultra-High-Lift Concepts
Authors:
- 1 July 2002
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 124 (3) , 385-392
Abstract
This paper describes a detailed study into the unsteady boundary layer behavior in two high-lift and one ultra-high-lift Rolls-Royce Deutschland LP turbines. The objectives of the paper are to show that high-lift and ultra-high-lift concepts have been successfully incorporated into the design of these new LP turbine profiles. Measurements from surface mounted hot film sensors were made in full size, cold flow test rigs at the altitude test facility at Stuttgart University. The LP turbine blade profiles are thought to be state of the art in terms of their lift and design philosophy. The two high-lift profiles represent slightly different styles of velocity distribution. The first high-lift profile comes from a two-stage LP turbine (the BR710 cold-flow, high-lift demonstrator rig). The second high-lift profile tested is from a three-stage machine (the BR715 LPT rig). The ultra-high-lift profile measurements come from a redesign of the BR715 LP turbine: this is designated the BR715UHL LP turbine. This ultra-high-lift profile represents a 12 percent reduction in blade numbers compared to the original BR715 turbine. The results from NGV2 on all of the turbines show “classical” unsteady boundary layer behavior. The measurements from NGV3 (of both the BR715 and BR715UHL turbines) are more complicated, but can still be broken down into classical regions of wake-induced transition, natural transition and calming. The wakes from both upstream rotors and NGVs interact in a complicated manner, affecting the suction surface boundary layer of NGV3. This has important implications for the prediction of the flows on blade rows in multistage environments.Keywords
This publication has 12 references indexed in Scilit:
- The Application of Ultra High Lift Blading in the BR715 LP Turbine2001
- High Lift and Aft Loaded Profiles for Low Pressure Turbines2000
- Local Measurement of Loss Using Heated Thin Film Sensors1998
- Design of New Three Stage Low Pressure Turbine for the BMW Rolls-Royce BR715 Turbofan Engine1997
- Development of Blade Profiles for Low Pressure Turbine Applications1996
- Investigation of the Calmed Region Behind a Turbulent Spot1996
- Boundary Layer Development in Axial Compressors and Turbines: Part 2 of 4 — Compressors1995
- Compressor Blade Boundary Layers in the Presence of Wakes1995
- Experimental Investigations of the Influence of Incoming Wakes on the Losses of a Linear Turbine Cascade1993
- Determination of mean and dynamic skin friction, separation and transition in low-speed flow with a thin-film heated elementJournal of Fluid Mechanics, 1966