Path tracking control of a manipulator considering torque saturation
Authors:
- H. AraiHAH. Arai
- S. TachiSTS. Tachi
- 1 February 1994
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 41 (1) , 25-31
Abstract
When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned taking into consideration the manipulator's dynamics and actuator's torque limits, at least one of the joints should be at the torque limit. The execution of such a trajectory by a conventional feedback control scheme results in torque saturation. Consequently, the tracking error cannot be suppressed and the manipulator may deviate from the desired path. In this paper, the author's propose a feedback control method for path tracking which takes the torque saturation into account. Based on the desired path, a coordinate system called path coordinates is defined. The path coordinates are composed of the component along the path and the components normal to the path. The equation of motion is described in terms of the path coordinates. Control of the components normal to the path is given priority in order to keep the motion of the manipulator on the path. Simulations of a two-degree-of-freedom manipulator show the effectiveness of this method.<>Keywords
This publication has 8 references indexed in Scilit:
- Dynamic control of a manipulator with passive joints in operational spaceIEEE Transactions on Robotics and Automation, 1993
- Torque-limited path following by online trajectory time scalingIEEE Transactions on Robotics and Automation, 1990
- Minimum time closed-loop tracking of a specified path by robot1990
- A concept for manipulator trajectory planningIEEE Journal on Robotics and Automation, 1987
- Planning of Minimum- Time Trajectories for Robot ArmsThe International Journal of Robotics Research, 1986
- Time-optimal motions of robots in assembly tasksIEEE Transactions on Automatic Control, 1986
- Time-Optimal Control of Robotic Manipulators Along Specified PathsThe International Journal of Robotics Research, 1985
- Minimum-time control of robotic manipulators with geometric path constraintsIEEE Transactions on Automatic Control, 1985