Influence of Chlorinating Solution Concentration on the Interactions Produced Between Chlorinated Thermoplastic Rubber and Polyurethane Adhesive at the Interface
- 1 January 2002
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 78 (1) , 39-77
Abstract
Chlorination of a thermoplastic styrene-butadiene-styrene rubber (S0) with different amounts of trichloroisocyanuric acid (TCI) solutions in ethyl acetate improved its adhesion to polyurethane adhesives. A strong interaction of the PU (polyurethane) adhesive and the chlorinated S0 rubber chains is produced at the interface. The increase in the concentration of TCI from 0.5 wt% up to 2-7 wt% resulted in the deposition of crystallites of unreacted TCI on the rubber surface. The remaining TCI on the rubber surface migrates through the PU adhesive producing some chlorination of the PU chains. The failure of the joint is located in this interface composed of both chlorinated S0 rubber and partially-chlorinated PU adhesive.Keywords
This publication has 6 references indexed in Scilit:
- Chlorination of SBS rubbers with different styrene contents using trichloro-isocyanuric acidJournal of Adhesion Science and Technology, 1999
- Failure analysis of surface-treated unvulcanized SBS rubber/polyurethane adhesive jointsInternational Journal of Adhesion and Adhesives, 1997
- Weak Boundary Layers in Styrene-Butadiene RubberThe Journal of Adhesion, 1995
- Determination of contact angles and pore sizes of porous media by column and thin layer wickingJournal of Adhesion Science and Technology, 1992
- Surface Modification of Elastomers for BondingThe Journal of Adhesion, 1983
- Behaviour of Urethane Adhesives on Rubber SurfacesThe Journal of Adhesion, 1973