Strength prediction of T-peel joints by a hybrid spot-welding/adhesive bonding technique
- 29 November 2016
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 94 (3) , 181-198
Abstract
The need of joining methods that best meet the design requirements has led to the increased use of adhesive joints at the expense of welding, fastening and riveting. Hybrid weld-bonded joints are obtained by combining adhesive bonding with a welded joint, providing superior strength and stiffness, and higher resistance to peeling and fatigue. In the present work, an experimental and numerical study of welded, adhesive and hybrid (weld-bonded) T-peel joints under peeling loads is presented. The brittle Araldite® AV138, the moderately ductile Araldite® 2015 and the ductile Sikaforce® 7752 were the considered adhesives. An analysis of the experimental values and a comparison of these values with Finite Element Method (FEM) results in Abaqus® were carried out, which included a stress analysis in the adhesive and strength prediction by Cohesive Zone Models (CZM) considering failure simulation of both the adhesive layer and weld-nugget. It was found that the Sikaforce® 7752 performs best in the bonded and hybrid configurations. The good agreement between the experimental and numerical results enabled the validation of CZM to predict the strength of adhesive and hybrid T-peel joints, giving a basis for reducing the design time and enabling the optimization of these joints.Keywords
This publication has 41 references indexed in Scilit:
- Fracture toughness determination of adhesive and co-cured joints in natural fibre compositesComposites Part B: Engineering, 2013
- Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studiesInternational Journal of Adhesion and Adhesives, 2013
- Tensile and fatigue properties of weld-bonded and adhesive-bonded magnesium alloy jointsMaterials Science and Engineering: A, 2013
- Modelling of Single-Lap Joints Using Cohesive Zone Models: Effect of the Cohesive Parameters on the Output of the SimulationsThe Journal of Adhesion, 2012
- Traction–separation laws for progressive failure of bonded scarf repair of composite panelComposite Structures, 2011
- Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-grainingConstruction and Building Materials, 2010
- Peel and shear strength of spot-welded and weld-bonded dissimilar thickness jointsJournal of Materials Processing Technology, 2004
- Numerical methods for the determination of multiple stress singularities and related stress intensity coefficientsEngineering Fracture Mechanics, 1999
- Elastic crack growth in finite elements with minimal remeshingInternational Journal for Numerical Methods in Engineering, 1999
- Theory and Analysis of Peel Adhesion: Mechanisms and MechanicsTransactions of the Society of Rheology, 1959