Microstructure and Mechanical Property of Compact Graphite/6061Al Composite Prepared by Ultra-High Pressure Sintering
Open Access
- 24 July 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (15) , 5107
Abstract
Graphite/6061 aluminum (G/6061Al) composites with different content of graphite were ultra-high pressure (UHP)-sintered and hot pressing (HP)-sintered, respectively. The result shows that homogeneous dispersion of graphite flakes in the 6061Al matrix can be achieved using graphite flakes coated by nano-Al particles, both in the UHP-sintered and in the HP-sintered composite. Due to the comprehensive effects of ultra-high pressure, high temperature and formation of Al4C3, the UHP-sintered composites endowed with higher relative density, higher hardness, stronger tensile strength and better wear resistance than the HP-sintered composite. The highest tensile strength of the UHP-sintered with 5 vol.% graphite is 183 MPa. Wear test reveals that the wear rate of the UHP sintered with 10 vol.% G/6061Al decreases drastically when the sintering temperature is 650 °C or higher, which is one to three orders of magnitude lower than that of the HP-sintered. The lowest wear rate of the UHP sintered with 10 vol.% graphite is 0.15 × 10−5 g/mm, while that of the HP-sintered composite is 133 × 10−5 g/mm.Keywords
Funding Information
- Research Foundation of China University of Petroleum-Beijing at Karamay (XQZX20200016, XQZX20200019)
This publication has 20 references indexed in Scilit:
- Microstructure and mechanical properties of hot extruded 6016 aluminum alloy/graphite compositesJournal of Materials Science & Technology, 2018
- A study on wear behaviour of Al/6101/graphite compositesJournal of Asian Ceramic Societies, 2017
- Mechanical properties of aluminium based metal matrix composites reinforced with graphite nanoplateletsMaterials Science and Engineering: A, 2016
- Dual functions of TiC nanoparticles on tribological performance of Al/graphite compositesJournal of Physics and Chemistry of Solids, 2016
- Novel aluminum-graphene and aluminum-graphite metallic composite materials: Synthesis and propertiesJournal of Alloys and Compounds, 2016
- Spark plasma sintering of graphite–aluminum powder reinforced with SiC/Si particlesPowder Technology, 2015
- Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a reviewThe International Journal of Advanced Manufacturing Technology, 2015
- Structural characterization of aluminium alloy 7075–graphite composites fabricated by mechanical alloying and hot extrusionMaterials & Design (1980-2015), 2014
- Effects of sintering temperature and graphite addition on the mechanical properties of aluminumJournal of Industrial and Engineering Chemistry, 2012
- Wettability of carbon by aluminum and aluminum alloysMaterials Science and Engineering: A, 1998