Reactive blending approach to modify spin‐coated epoxy film: Part I. Synthesis and characterization of star‐shaped poly(ϵ‐caprolactone)
- 27 June 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 101 (6) , 3677-3688
Abstract
To effectively modify the properties of an epoxy, branched oligomers were synthesized from ϵ‐caprolactone (CL) and end‐functionalized to realize network precursors that can be reactively blended with the epoxy. The ring‐opening polymerization (ROP) of the CL in the presence of polyglycerol (PGL) initiator (3.9 and 9.1 mol %) and Sn(II) 2‐ethylhexanoate catalyst yielded oligomers with hydroxyl end‐groups, which were converted to carboxylic acid functionality by reaction with succinic anhydride. The functionalized oligomers had a four‐armed structure and the molecular weight of the oligomers could be controlled by the ratio of CL to PGL in the feed. To achieve an adequately crosslinked network in the reactive blending, a dual‐catalyzed reaction scheme was employed. First the oligomer was incorporated into the epoxy matrix in an imidazole‐catalyzed reaction and then the crosslinking was completed with an acid‐catalyzed ROP of the residual epoxies. Investigations showed that toughened coatings could be prepared from the inherently brittle epoxy through proper choice of the blending ratio of oligomer to epoxy. The blending increased surface hydrophobicity at high concentrations of functionalized oligomer, but did not have an adverse effect on the inherently advantageous endothelial cell spreading. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3677–3688, 2006Keywords
This publication has 62 references indexed in Scilit:
- Phase diagram prediction for a blend of Poly(2,6-dimethyl-1,4-phenylene ether) (PPE)/epoxy resin during reaction induced phase separationPolymer, 2003
- Synthesis of star polymer by means of the living polymerization of [(o-trifluoromethyl)phenyl]acetylene using a MoOCl4-based catalyst and the linking methodPolymer, 2003
- Surface modification of a liquid‐crystalline polymer for copper metallizationJournal of Polymer Science Part B: Polymer Physics, 2003
- Epoxy+liquid crystalline epoxy coreacted networks: II. Mechanical propertiesPolymer, 2002
- Synthesis, characterization and crosslinking of functional star‐shaped poly(ε‐caprolactone)Polymer International, 2001
- Synthesis of star-shaped poly( d , l -lactic acid-alt-glycolic acid) with multifunctional initiator and SnOct 2 catalystPolymer, 2001
- Toughening of a trifunctional epoxy systemPolymer, 2001
- Poly(ϵ-caprolactone)-poly(fluoroalkylene oxide)-poly(ϵ-caprolactone) block copolymers. 2. Thermal and surface propertiesPolymer, 2001
- Contact angle interpretation in terms of solid surface tensionColloids and Surfaces A: Physicochemical and Engineering Aspects, 2000
- Phase separation and apparent phase dissolution during cure process of thermoset/thermoplastic blendPolymer, 1995