Study of the Movement of Chips during Pine Wood Milling
Open Access
Abstract
Circumferential milling is used in wood processing, yet it generates vast quantities of dust and chips in a single pass, highlighting the need to predict chip dispersion and prevent associated hazards. This article presents findings from a theoretical and experimental analysis of chip size and kinematics of pine wood during cutting. A chip diffusion boundary surface model was established and its key parameters were determined through CCD testing. Results reveal that chip diffusion can be divided into three distinct areas based on motion state: main diffusion, random diffusion, and vortex. Notably, spindle speed and feed rate are most influential on the orthogonal diffusion angle of the main diffusion zone, whereas cutting depth most heavily impacts the top view diffusion angle. Chip scattering on the table showed an exponential increase in average chip size with sampling distance, whereas the boundary surface model accurately characterizes chip motion and demonstrates a reasonable degree of reliability, offering potential in predicting chip morphology and diffusion state. This model has important implications for wood milling practices, particularly in controlling chip dispersion.Keywords
Funding Information
- Intelligent European-style wooden window double-end composite fine milling and forming maResearch on Key Technologies for Manufacturing Intelligent European-Style Wooden Window Double-End Composite Fine Milling and Forming Machine (GA21A405, 2572020DR12)
- Fundamental Research Funds for the Central Universities (GA21A405, 2572020DR12)
This publication has 17 references indexed in Scilit:
- Mechatronic approach towards surface quality improvement in rotary wood machiningProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013
- Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer compositesJournal of Manufacturing Processes, 2012
- Wood-chip formation in circular saw blades studied by high-speed photographyWood Material Science & Engineering, 2012
- The effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC)Materials & Design (1980-2015), 2009
- Up-milling and down-milling wood with different grain orientations – the cutting forces behaviourEuropean Journal of Wood and Wood Products, 2009
- Up-milling and down-milling wood with different grain orientations – theoretical background and general appearance of the chipsEuropean Journal of Wood and Wood Products, 2009
- Upgrading designs of cyclone dust cleaner apparatusesRussian Journal of Non-Ferrous Metals, 2008
- Milling of wood and wood-based materials with a computerized numerically controlled router V: development of adaptive control grooving system corresponding to progression of tool wearJournal of Wood Science, 2006
- Discrimination of coated carbide tools wear by the features extracted from parallel force and noise levelAnnals of Forest Science, 2004
- Analysis of Roughness of Cutting Surface with NC Router. Influence of Grain Direction in Solid Wood.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1994