A Three-Phase Integrated Battery Charger for EVs Based on Six-Phase Open-End Winding Machine
- 13 April 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (11) , 12122-12132
Abstract
This article presents a new configuration of onboard integrated battery charger for electric vehicles (EVs) using six-phase machine and three-phase ac source. The configuration proposes the utilization of symmetrical six-phase open-end winding machine, twelve-leg inverter, and a dc-dc converter. The charger circuit is constructed by connecting directly the three-phase grid to the middle point of machine's phase winding, where the grid currents split into equal portions and flow in opposite directions, without adding an extra mechanical switch (or relay). From this concept, the proposed system has the advantages of obtaining high-power density with a large value of inductance for grid-side filter during charging and avoiding an electromagnetic torque as well as providing a high fault tolerant capability. Moreover, through proper control strategy, the proposed system is able to operate under unity power factor (UPF) with total harmonic distortion (THD) below 5%. In this article, the possibility of vehicle-to-grid (V2G) mode is also investigated. Detail of the control strategy for charging and V2G are given. Furthermore, simulation and experimental results are provided to validate the theoretical analysis.Keywords
Funding Information
- National Natural Science Foundation of China (51877055)
This publication has 29 references indexed in Scilit:
- Compact Onboard Single-Phase EV Battery Charger With Novel Low-Frequency Ripple Compensator and Optimum Filter DesignIEEE Transactions on Vehicular Technology, 2015
- An EV Drive-Train With Integrated Fast Charging CapabilityIEEE Transactions on Power Electronics, 2015
- Isolated Chargers for EVs Incorporating Six-Phase MachinesIEEE Transactions on Industrial Electronics, 2015
- A review of single-phase on-board integrated battery charging topologies for electric vehicles2015
- Fault-Tolerant Operation of an Open-End Winding Five-Phase PMSM Drive With Short-Circuit Inverter FaultIEEE Transactions on Industrial Electronics, 2015
- Multi-functional On-board Battery Charger for Plug-in Electric VehiclesIEEE Transactions on Industrial Electronics, 2014
- Onboard Integrated Battery Charger for EVs Using an Asymmetrical Nine-Phase MachineIEEE Transactions on Industrial Electronics, 2014
- Vehicle-to-Grid Reactive Power Operation Using Plug-In Electric Vehicle Bidirectional Offboard ChargerIEEE Transactions on Industrial Electronics, 2014
- A Harmonic Suppression Scheme for Open-End Winding Split-Phase IM Drive Using Capacitive Filters for the Full Speed RangeIEEE Transactions on Industrial Electronics, 2014
- Carrier‐based pulse‐width modulation techniques for asymmetrical six‐phase open‐end winding drivesIET Electric Power Applications, 2013