Comparison of Frequency and Time-Domain Iron and Magnet Loss Modeling Including PWM Harmonics in a PMSG for a Wind Energy Application
Authors:
- 12 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 30 (2) , 476-486
Abstract
This paper presents the calculation of the electromagnetic losses for a 2.1-MW permanent magnet synchronous generator for wind energy application. The focus is on recognizing the significance of including the analysis of higher harmonics in the electromagnetic loss calculation. The analyzed harmonics include the ones resulting from the use of a pulse width modulation (PWM) of the voltage of the generator. The magnet losses calculated for the PWM current are several times higher than the ones calculated for the sinusoidal current. In addition, frequency-domain and time-domain models for iron loss calculation are compared. The frequency-domain model that assumes a sinusoidal variation and considers only the fundamental component of the magnetic induction in the stator core material underestimates the iron losses in the machine. Especially, when the additional losses resulting from the higher harmonics, rotational fields, and minor loops are taken into account. Finally, it is shown how the composition and thickness of the electrical steel used in the stator core of the generator influences the total core losses.Keywords
This publication has 13 references indexed in Scilit:
- Influence of Stator Slotting on the Performance of Permanent-Magnet Machines With Concentrated WindingsIEEE Transactions on Magnetics, 2012
- Effects of MMF Harmonics on Rotor Eddy-Current Losses for Inner-Rotor Fractional Slot Axial Flux Permanent Magnet Synchronous MachinesIEEE Transactions on Magnetics, 2012
- Methodologies for testing a 2 MW permanent magnet wind turbine generator2011
- Permanent magnet loss reduction in PM-machines using analytical and FEM calculation2010
- Optimization of Magnet Segmentation for Reduction of Eddy-Current Losses in Permanent Magnet Synchronous MachineIEEE Transactions on Energy Conversion, 2010
- Impact of Winding Layer Number and Magnet Type on Synchronous Surface PM Machines Designed for Wide Constant-Power Speed Range OperationIEEE Transactions on Energy Conversion, 2008
- Effect of Axial Segmentation of Permanent Magnets on Rotor Loss in Modular Permanent-Magnet Brushless MachinesIEEE Transactions on Industry Applications, 2007
- Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per poleIEEE Transactions on Magnetics, 2005
- Predicting Loss in Magnetic Steels Under Arbitrary Induction Waveform and With Minor Hysteresis LoopsIEEE Transactions on Magnetics, 2004
- Estimating rotational iron losses in an induction machineIEEE Transactions on Magnetics, 2003