Reinforcing Cotton Recycled Fibers for the Production of High-Quality Textile Structures
Open Access
Abstract
The textile industry is under increasing pressure to adopt sustainable practices due to the significant environmental impacts associated with fiber production, including high energy consumption, water usage, and substantial greenhouse gas emissions. The recycling of textile waste, particularly cotton, is a promising solution that has the potential to reduce landfill waste and decrease the demand for virgin fibers. However, mechanically recycled cotton fibers frequently demonstrate diminished mechanical properties compared to virgin fibers, which limits their potential for high-quality textile applications. This study explores the use of cross-linking agents (citric acid (CA) and sodium hypophosphite (SHP)), polymers (polyethylene glycol (PEG), chitosan (CH), carboxymethyl cellulose (CMC) and starch (ST)), and silicas (anionic (SA) and cationic (SC)) to enhance the mechanical properties of recycled cotton fibers. The treatments were then subjected to a hierarchical ranking, with the effectiveness of each treatment determined by its impact on enhancing fiber tenacity. The findings of this research indicate that the most effective treatment was starck (ST_50), which resulted in an enhancement of tenacity from 14.63 cN/tex to 15.34 cN/tex (+4.9%), closely followed by CA-SHP_110/110, which also reached 15.34 cN/tex (+4.6%). Other notable improvements were observed with CMC_50 (15.23 cN/tex), PEG_50 (14.91 cN/tex), and CA_50 (14.89 cN/tex), all in comparison to the control. In terms of yarn quality, the CA-SHP_110/110 treatment yielded the most substantial reductions in yarn irregularities, including thin places, thick places, and neps with decreases of 36%, 10%, and 7%, respectively. Furthermore, CA_50 exhibited moderate enhancements in yarn regularity, thin places (−12%), thick places (−6.1%), and neps (−8.9%). The results of this study demonstrate that combining CA with SHP, particularly when preceded by the heating of the solution before the addition of the fibers, results in a substantial enhancement of the structural integrity, strength, and overall quality of recycled cotton fibers. This approach offers a viable pathway for the improvement of the performance of recycled cotton, thereby facilitating its wider utilization in high-quality textile products.Keywords
Funding Information
- IAPMEI-Agência para a Competitividade e Inovação, I.P. through the Lusitano project (Agenda Mobilizadora para a Inovação Empresarial da Indústria Têxtil e do Vestuário de Portugal (01/C05-i09/2024.PC644933224-00000043)
This publication has 45 references indexed in Scilit:
- Effects of starch–citric acid cross-linking on the fibrous composites using waste paper pulp material for eco-friendly packagingBiomass Conversion and Biorefinery, 2022
- Pretreatment of Cotton2020
- Cotton Fiber Structure2018
- Pilling-resistant knitwear2018
- Past, present and future prospects of cotton cross-linking: New insight into nano particlesCarbohydrate Polymers, 2012
- Natural Fibers2012
- Pull-out properties of polyester woven fabrics: Effects of softening agent and interlacement on single and multiple yarn pull-out forces and analysis by statistical modelFibers and Polymers, 2011
- Fourier transform infrared spectroscopic approach to the study of the secondary cell wall development in cotton fiberCellulose, 2009
- Evaluating cell wall structure and composition of developing cotton fibers using Fourier transform infrared spectroscopy and thermogravimetric analysisJournal of Applied Polymer Science, 2007
- Characterization of cotton fabric scouring by FT-IR ATR spectroscopyCarbohydrate Polymers, 2004