Thermal Evaluation of 2.5-D Integration Using Bridge-Chip Technology: Challenges and Opportunities
Open Access
- 28 June 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 7 (7) , 1101-1110
Abstract
In this paper, 2.5-D integrated circuits (ICs) using bridge-chip technology are thermally evaluated to investigate thermal challenges and opportunities for such multi-die packages. To this end, the objectives of this paper are twofold. First, thermal benchmarking of a number of 2.5-D integration approaches is performed and compared to 3-D ICs for completeness. Thermal modeling shows that the evaluated 2.5-D integration approaches exhibit similar thermal characteristics, but show significant improvements compared to 3-D IC solutions with the same power consumption. Second, this paper explores bridge-chip-based 2.5-D integrated systems as a function of bridge-chip thickness, thermal interface material properties, microbump properties, die thickness, die thickness mismatch, and die-to-die spacing along with transient analysis to investigate time-domain thermal coupling. Results suggest that a die thickness mismatch of 100 μm can increase the maximum temperature by 25.8% Therefore, the die thickness mismatch should be kept as small as possible, and the hottest die should be the thickest. Moreover, reducing die-to-die space from 1 to 0 mm increases thermal coupling, and the low-power dice, such as DRAM, can have a temperature increase of 6.1%.Keywords
Funding Information
- NSF (CCF-1302297)
This publication has 24 references indexed in Scilit:
- Heterogeneous Interconnect Stitching Technology With Compressible MicroInterconnects for Dense Multi-Die IntegrationIEEE Electron Device Letters, 2016
- Embedded Multi-die Interconnect Bridge (EMIB) -- A High Density, High Bandwidth Packaging Interconnect2016
- Thermal Isolation Using Air Gap and Mechanically Flexible Interconnects for Heterogeneous 3-D ICsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2015
- Heterogeneous 2.5D integration on through silicon interposerApplied Physics Reviews, 2015
- Thermal Design and Constraints for Heterogeneous Integrated Chip Stacks and Isolation Technology Using Air Gap and Thermal BridgeIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Fast and Accurate Thermal Modeling and Optimization for Monolithic 3D ICs2014
- Generic thermal modeling study of the impact of 3D -interposer material and thickness options on the thermal performance and die-to-die thermal coupling2014
- Cooling three-dimensional integrated circuits using power delivery networks2012
- Thermal-aware cell and through-silicon-via co-placement for 3D ICs2011
- Die Stacking (3D) Microarchitecture2006