A Tube-Based Model Predictive Control for Path Tracking of Autonomous Articulated Vehicle
Open Access
Abstract
This paper presents tube-based Model Predictive Control (MPC) for the path and velocity tracking of an autonomous articulated vehicle. The target platform of this study is an autonomous articulated vehicle with a non-steerable axle. Consequently, the articulation angle and wheel torque input are determined by the tube-based MPC. The proposed MPC aims to achieve two objectives: minimizing path tracking error and enhancing robustness to disturbances. Furthermore, the lateral stability of the autonomous articulated vehicle is considered to reflect its dynamic characteristics. The vehicle model for the MPC is formulated using local linearization to minimize modeling errors. The reference state is determined using a virtual controller based on the linear quadratic regulator to provide the optimal reference for the MPC solver. The proposed algorithm was evaluated through a simulation study with base algorithms under noise injection into the sensor signal. Simulation results demonstrate that the proposed algorithm achieved the smallest path tracking error, compared to the base algorithms. Additionally, the proposed algorithm demonstrated robustness to external noise for multiple signals.Keywords
Funding Information
- Research Program funded by the SeoulTech (Seoul National University of Science and Technology)
This publication has 36 references indexed in Scilit:
- Connected and Autonomous Vehicles and Infrastructures: A Literature ReviewInternational Journal of Pavement Research and Technology, 2021
- Trajectory planning and robust tracking control for a class of active articulated tractor-trailer vehicle with on-axle structureEuropean Journal of Control, 2020
- LPV/H∞ Controller Design for Path Tracking of Autonomous Ground Vehicles Through Four-Wheel Steering and Direct Yaw-Moment ControlInternational Journal of Automotive Technology, 2019
- LQR-GA Controller for Articulated Dump Truck Path Tracking SystemJournal of Shanghai Jiaotong University (Science), 2018
- A full error dynamics switching modeling and control scheme for an articulated vehicleInternational Journal of Control, Automation, and Systems, 2015
- Path planning, modeling and simulation of an autonomous articulated heavy construction machine performing a loading cycleApplied Mathematical Modelling, 2013
- CVXGEN: a code generator for embedded convex optimizationOptimization and Engineering, 2011
- Design, implementation, and test of skid steering-based autonomous driving controller for a robotic vehicle with articulated suspensionJournal of Mechanical Science and Technology, 2010
- Autonomous underground tramming for center‐articulated vehiclesJournal of Field Robotics, 2008
- Stanley: The robot that won the DARPA Grand ChallengeJournal of Field Robotics, 2006