Poly(ethylene imine) and Tetraethylenepentamine as Protecting Agents for Metallic Copper Nanoparticles
Authors:
- 3 February 2009
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 1 (2) , 519-525
Abstract
The aim of this research was to explore the use of amine-containing polymeric and low-molar-mass organic protecting agents in the preparation of copper nanoparticles. Particles were synthesized using poly(ethylene imine) (PEI) or tetraethylenepentamine (TEPA) as protecting agents. The resulting particles were studied with UV−vis spectrometry, thermogravimetry, scanning electron microscopy, and transmission electron microscopy, wide-angle X-ray scattering with heating, X-ray photoelectron spectroscopy, and Auger electron spectroscopy. The average crystal sizes for the particles were at room temperature 8.5 and 19.4 nm for PEI and TEPA, respectively, and some surface oxidation was observed. The particles were sintered on paper, and the resistance and resistivity were measured. For Cu/PEI samples, the protecting agent was removed upon sintering at relatively low temperatures (between 150 and 200 °C). At this temperature range, particles exhibited a rapid increase in the crystal size. Sintered particles exhibited high conductivity, indicating that these kinds of materials might find use in paper-based printing.Keywords
This publication has 30 references indexed in Scilit:
- Graphene-stabilized copper nanoparticles as an air-stable substitute for silver and gold in low-cost ink-jet printable electronicsNanotechnology, 2008
- Charge-Transfer-Driven Diffusion Processes in Cu@Cu-Oxide Core−Shell Nanoparticles: Oxidation of 3.0 ± 0.3 nm Diameter Copper NanoparticlesThe Journal of Physical Chemistry C, 2008
- Synthesis and characterization of copper sulfide nanocrystallites with low sintering temperaturesJournal of Materials Chemistry, 2008
- Direct writing of copper conductive patterns by ink-jet printingThin Solid Films, 2007
- Synthesis of Size-Controlled and Shaped Copper NanoparticlesLangmuir, 2007
- Controlled synthesis and characterization of covellite (CuS) nanoflakesMaterials Chemistry and Physics, 2006
- Inkjet printing of nanosized silver colloidsNanotechnology, 2005
- Dendrimer-Encapsulated Metal Nanoparticles: Synthesis, Characterization, and Applications to CatalysisAccounts of Chemical Research, 2000
- Synthesis and characterization of Cu x S nanoparticles. Nature of the infrared band and charge-carrier dynamicsPure and Applied Chemistry, 2000
- Poly(Amidoamine) Dendrimer-Templated Nanocomposites. 1. Synthesis of Zerovalent Copper NanoclustersJournal of the American Chemical Society, 1998