Electron Beam-Absorption-Electrostatic Spray Hybrid System for Simultaneous Removal of NOx, SO2,and Their Secondary Particulate Byproducts
Authors:
- Seo Hee SeoSSSeo Hee Seo
- Yong-Hwan OhYOYong-Hwan Oh
- Sang-Hee JoSJSang-Hee Jo
- Tae-Hun KimTKTae-Hun Kim
- Giwon KangGKGiwon Kang
- Y SonYSY Son
- Changhyuk KimCKChanghyuk Kim
Preprint
- 23 October 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The electron beam (EB)-absorption flue gas treatment system was developed to enhance the removal efficiency of gaseous air pollutants such as NOx and SO2. However, EB irradiation can simultaneously cause secondary particulate formation through gas-to-particle conversion. In this study, the EB-absorption system was improved by integrating an electrostatic spray (ES) to remove secondary particles generated during flue gas treatment. The flue gas cleaning performance of the EB-absorption-ES hybrid system was systematically evaluated using different additive types (NaOH and NH4OH) and gas-to-additive stoichiometric ratios (1:2, 1:5, and 1:10). Increasing the stoichiometric ratio increased the removal efficiencies of gaseous pollutants. NO2 removal efficiency increased up to 83.3% with the stoichiometric ratio, while SO2 removal remained above 85% under all experimental conditions. However, this EB-induced flue gas treatment simultaneously promoted secondary particle formation within the size range of 150-250 nm. Both total number and volume concentrations of the secondary particles increased with the stoichiometric ratio. Compared with NaOH, NH4OH showed substantially greater secondary particle formation due to additional gas-phase neutralization involving volatilized NH3. The downstream ES chamber significantly captured secondary particles generated during EB-based flue gas treatment, and its particle removal performance improved with increasing applied voltage. MPPD modeling further indicated substantially reduction of potential respiratory deposition of additive-derived particles after ES addition. Ion species analysis strongly supported the effectiveness of ES in capturing secondary particles formed during the EB-absorption process.Keywords
This publication has 28 references indexed in Scilit:
- Real-time detection of vehicle-originated condensable particulate matter through thermodenuder integrated aerosol measurement method at tailpipesEnvironmental Research, 2022
- Removal of high concentrations of NOx and SO2 from diesel off-gases using a hybrid electron beam technologyEnergy Reports, 2020
- Historic and futuristic review of electron beam technology for the treatment of SO2 and NOx in flue gasChemical Engineering Journal, 2019
- Sulphuric acid and aerosol particle production in the vicinity of an oil refineryAtmospheric Environment, 2015
- Submicron particles removal by charged sprays. FundamentalsJournal of Electrostatics, 2013
- Characterization of electrode material for electrostatic spray charging: Theoretical and engineering practicesJournal of Electrostatics, 2013
- Treatment of off-gases containing NOx by electron beamCatalysis Today, 2012
- Stabilization of sulfide and sulfite and ion-pair chromatography of mixtures of sulfide, sulfite, sulfate and thiosulfateJournal of Chromatography A, 2005
- Removal of SO2 and NOx from stack gases by electron beam irradiationInternational Journal of Radiation Applications and Instrumentation. Part C. Radiation Physics and Chemistry, 1988
- Deposition of particles in the human respiratory tract in the size range 0.005–15 μmJournal of Aerosol Science, 1986