Modeling and Separation of Thermal Effects from Cable-Stayed Bridge Response
Authors:
- 1 May 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 24 (5)
Abstract
This article presents a practical multivariate linear-based model for modeling and separation of thermal effects from the cable-stayed bridge response. First, the discrete typical thermal loadings, which are the variables in the linear model, are derived from the real-time recorded temperature measurements. Then, weight coefficients (i.e., normalized response corresponding to each type of temperature action) in the model are acquired by considering the simulation results of the numerical models. Finally, the Third Nanjing Yangtze River Bridge is employed as a case study to validate the effectiveness of the proposed methodology. The reliability of the proposed multivariate linear-based model is verified on the measurements of deflection and temperature during the bridge-closure time window. The maximum error between the predicted and measured deflection is 5.6 mm, which accounts for the resolution of the connected pipe system. This study not only helps to understand the thermal field of such large-span cable-stayed bridges but also develops an effective model that separates thermal response and can benefit real-time quasi-static-based anomaly detection for large-scale bridges.Keywords
This publication has 21 references indexed in Scilit:
- Thermal field characteristic analysis of steel box girder based on long-term measurement dataInternational Journal of Steel Structures, 2012
- Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behaviorStructural Control and Health Monitoring, 2012
- Evaluating two model-free data interpretation methods for measurements that are influenced by temperatureAdvanced Engineering Informatics, 2011
- Bridge Model Updating Using Response Surface Method and Genetic AlgorithmJournal of Bridge Engineering, 2010
- Progressive finite element model calibration of a long-span suspension bridge based on ambient vibration and static measurementsEngineering Structures, 2010
- Fiber-optic-based displacement transducer to measure bridge deflectionsStructural Health Monitoring, 2010
- Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring dataEngineering Structures, 2008
- Simulation of the Effect of Temperature Variation on Damage Detection in a Long-span Cable-stayed BridgeStructural Health Monitoring, 2007
- Long term vibration monitoring of an RC slab: Temperature and humidity effectEngineering Structures, 2006
- Temperature Variations in Concrete BridgesJournal of Structural Engineering, 1983