Hydraulic Tomography: Continuity and Discontinuity of High‐ K and Low‐ K Zones
- 19 June 2015
- journal article
- Published by Wiley in Groundwater
- Vol. 54 (2) , 171-185
Abstract
Hydraulic tomography is an emerging field and modeling method that provides a continuous hydraulic conductivity ( K ) distribution for an investigated region. Characterization approaches that rely on interpolation between one‐dimensional ( 1D ) profiles have limited ability to accurately identify high‐ K channels, juxtapositions of lenses with high K contrast, and breaches in layers or channels between such profiles. However, locating these features is especially important for groundwater flow and transport modeling, and for design and operation of in situ remediation in complex hydrogeologic environments. We use transient hydraulic tomography to estimate 3D K in a volume of 15‐m diameter by 20‐m saturated thickness in a highly heterogeneous unconfined alluvial (clay to sand‐and‐gravel) aquifer with a K range of approximately seven orders of magnitude at an active industrial site in Assemini, Sardinia, Italy. A modified Levenberg‐Marquardt algorithm was used for geostatistical inversion to deal with the nonlinear nature of the highly heterogeneous system. The imaging results are validated with pumping tests not used in the tomographic inversion. These tests were conducted from three of five clusters of continuous multichannel tubing ( CMTs ) installed for observation in the tomographic testing. Locations of high‐ K continuity and discontinuity, juxtaposition of very high‐ K and very low‐ K lenses, and low‐ K “plugs” are evident in regions of the investigated volume where they likely would not have been identified with interpolation from 1D profiles at the positions of the pumping well and five CMT clusters. Quality assessment methods identified a suspect high‐ K feature between the tested volume and a lateral boundary of the model.Keywords
Funding Information
- Eni
This publication has 39 references indexed in Scilit:
- A temporal sampling strategy for hydraulic tomography analysisWater Resources Research, 2013
- Capturing aquifer heterogeneity: Comparison of approaches through controlled sandbox experimentsWater Resources Research, 2011
- Large‐scale inverse modeling with an application in hydraulic tomographyWater Resources Research, 2011
- Cross-well slug interference tests: An effective characterization method for resolving aquifer heterogeneityJournal of Hydrology, 2010
- Performance Assessment of Bioremediation and Natural AttenuationCritical Reviews in Environmental Science and Technology, 2009
- A field assessment of the value of steady shape hydraulic tomography for characterization of aquifer heterogeneitiesWater Resources Research, 2007
- Field, laboratory, and modeling investigation of the skin effect at wells with slotted casing, Boise Hydrogeophysical Research SiteJournal of Hydrology, 2006
- DNAPL Characterization Methods and Approaches, Part 1: Performance ComparisonsGroundwater Monitoring & Remediation, 2001
- Specific Yield as Determined by Type‐Curve Analysis of Aquifer‐Test DataGroundwater, 1994
- A geostatistical approach to the inverse problem in groundwater modeling (steady state) and one‐dimensional simulationsWater Resources Research, 1983