Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings
Open Access
- 27 July 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (15) , 5140
Abstract
Thermal spraying deploying liquid feedstock offers an exciting opportunity to obtain coatings with characteristics vastly different from those produced using conventional spray-grade powders. The most extensively investigated variant of this technique is Suspension Plasma Spraying (SPS), which utilizes a suspension of fine powders in an appropriate medium. The relatively recent advent of axial feed capable plasma spray systems can enable higher throughputs during SPS, provides the possibility for spraying with longer stand-off distances, and also permit the use of suspensions with higher solid loading. The present work investigates axial plasma sprayed coatings produced using a mixed suspension of fine (submicron or nano-sized) powders of Al2O3 and YSZ as a case study. Deposition of the mixed suspension using axial injection plasma spraying, comprehensive evaluation of characteristics of the resulting coatings, and assessment of their tribological behavior were of particular interest. Evaluation of surface morphology, microstructure, and hardness of the coatings reveals that axial SPS of mixed suspensions provides an exciting pathway to realize finely structured multi-constituent coatings using suspensions with as high as 40 wt.% solid loading. The study of scratch, dry sliding wear, and erosion behavior also specifically shows that the addition of YSZ in the Al2O3 matrix can improve the tribological properties of the coating.Keywords
This publication has 46 references indexed in Scilit:
- Processing and design methodologies for advanced and novel thermal barrier coatings for engineering applicationsParticuology, 2016
- Characterization of Microstructure and Thermal Properties of YSZ Coatings Obtained by Axial Suspension Plasma Spraying (ASPS)Journal of Thermal Spray Technology, 2015
- Comparison of the Microstructural Characteristics and Electrical Properties of Thermally Sprayed Al2O3 Coatings from Aqueous Suspensions and Feedstock PowdersJournal of Thermal Spray Technology, 2012
- Sliding wear behavior of plasma sprayed nanoceramic coatings for biomedical applicationsWear, 2011
- Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (~50 nm)Journal of Thermal Spray Technology, 2009
- Fabrication and electrochemical performance of solid oxide fuel cell components by atmospheric and suspension plasma sprayTransactions of Nonferrous Metals Society of China, 2009
- Microstructure of Suspension Plasma Spray and Air Plasma Spray Al2O3-ZrO2 Composite CoatingsJournal of Thermal Spray Technology, 2009
- A Comparative Microstructural Investigation of Nanostructured and Conventional Al2O3 Coatings Deposited by Plasma SprayingJournal of Thermal Spray Technology, 2008
- Parameters Controlling Liquid Plasma Spraying: Solutions, Sols, or SuspensionsJournal of Thermal Spray Technology, 2008
- Thermal Spray Coatings Engineered from Nanostructured Ceramic Agglomerated Powders for Structural, Thermal Barrier and Biomedical Applications: A ReviewJournal of Thermal Spray Technology, 2007