Optimization of silver cementation yield in fixed bed reactor using factorial design and central composite design
Authors:
- 23 November 2010
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 88 (6) , 1099-1106
Abstract
This work deals with cementation of silver onto iron grid in fixed bed reactor. The influence of several parameters is studied namely: initial concentration of silver [Ag+]0, flow rate, solution pH, and mass of iron. Moreover, their influence on the yield of the reaction of cementation is investigated statistically by the experimental design in view of industrial application. The estimation and the comparison of the parameter's effects are realised by using two‐level factorial design. The analysis of these effects permits to state that the most influential factor is the mass of iron with an effect of (+5.642), the second in the order is the initial concentration of silver ions (Ag+) with an effect of (+4.005), the third is the flow rate of the electrolytic solution with an effect of (+3.824). A central composite design methodology is employed to determine the optimum conditions for a silver cementation yield onto iron grid. For this end, the experimental results were approximated by a second‐order model as well as the surface contour plots and surface responses are drowned. The optimal conditions found for initial silver concentration, such as a flow rate, pH of the solution and mass of iron, are respectively: 21.25 mg/L, 4.43 L/min, 3.6 and 50 g. Under these conditions, the obtained silver cementation yield is 96.851%.Keywords
This publication has 18 references indexed in Scilit:
- Optimization of copper cementation process by iron using central composite design experimentsChemical Engineering Journal, 2007
- Statistical design of experiments as a tool for optimizing the batch conditions to methylene blue biosorption on yellow passion fruit and mandarin peelsDyes and Pigments, 2007
- Enhancement of copper cementation using ceramic suspended solids under single phase flowSeparation and Purification Technology, 2007
- Purification of zinc ammoniacal leaching solution by cementation: Determination of optimum process conditions with experimental design by Taguchi's methodSeparation and Purification Technology, 2006
- Factorial design for the evaluation of the influence of synthesis parameters upon the textural and structural properties of SBA-15 ordered materialsMicroporous and Mesoporous Materials, 2006
- Study of the operational parameters involved in designing a particle bed reactor for the removal of lead from industrial wastewater — central composite design methodologyChemical Engineering Journal, 2005
- Mercury removal from aqueous solutions by zinc cementationWaste Management, 2002
- Study of the kinetics of the cementation of silver ions onto copper in a rotating cylinder system from acidic sulphate solutionsHydrometallurgy, 2002
- Removal of lead ions from wastewater by cementation on a gas-sparged zinc cylinderSeparation and Purification Technology, 2000
- Cementation behavior of gold and silver onto Zn, Al, and Fe powders from acid thiourea solutionsCanadian Metallurgical Quarterly, 1997