Modeling of Fatigue Cracking in Asphalt Materials Based on the Paris Law with an Initialization Term—Calibration from Notched and Unnotched Specimens
Authors:
- 9 March 2023
- journal article
- research article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 2132-2146
Abstract
This article aims at presenting a thermo-mechanical model dedicated to fatigue cracking in bituminous material. The model calibration based on two-point bending (2PB) fatigue tests performed on specimens of bitumen-bound sand is also detailed. In the model, crack growth is handled by the Paris law considering the initialization term Nini. This parameter represents the number of loading cycles required to initiate a short macrocrack of length a0 from which the Paris law can be applied. The tests utilized for calibration and comparison with the numerical simulations are performed on notched and unnotched trapezoidal samples, for different levels of imposed displacement amplitude. The parameters of the Paris law are determined using the notched specimens (a0 being assimilated to the notch depth) except for Nini, which is deduced from the difference in lifetime duration between the tests carried out on notched and unnotched specimens. The full calibration procedure described thereafter has the advantage to not depend on the choice of a0. It is shown that the simulations run for the calibrated model are globally in good agreement with the test results obtained for both types of samples and for all the imposed displacement amplitudes. Finally, the model is used to predict the response of four-point bending tests carried out on the same bitumen-bound sand, considering the input parameters determined from the 2PB tests. The intrinsic nature of the model is evaluated through its ability to simulate both types of tests using the same set of material parameters.Keywords
This publication has 16 references indexed in Scilit:
- Quality assessment of speckle patterns for DIC by consideration of both systematic errors and random errorsOptics and Lasers in Engineering, 2016
- Characterisation of local grain size variation of welded structural steelWelding in the World, 2016
- Numerical simulation of local temperature evolution in bituminous materials under cyclic loadingEuropean Journal of Environmental and Civil Engineering, 2016
- All about speckles: Speckle Size MeasurementExperimental Techniques, 2014
- All about Speckles: AliasingExperimental Techniques, 2014
- Viscoelastoplastic Continuum Damage Model for Asphalt Concrete in TensionJournal of Engineering Mechanics, 2011
- Quantitative Comparison of Energy Methods to Characterize Fatigue in Asphalt MaterialsJournal of Materials in Civil Engineering, 2009
- Continuum Damage Approach to Asphalt Concrete Fatigue ModelingJournal of Engineering Mechanics, 2004
- Fatigue of bituminous mixturesMaterials and Structures, 2004
- A theory of mechanical behavior of elastic media with growing damage and other changes in structureJournal of the Mechanics and Physics of Solids, 1990