Effect of Tin on Microstructure and Electrochemistrical Properties of Mg-Al-Sn-Zn Magnesium Alloys Anodic Materials
Authors:
- 21 February 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 197-198, 1129-1134
Abstract
Morphologies, microstructure and composition distribution of the magnesium anodic materials were studied by metallographic microscopy, x-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). The corrosion behavior and electrochemical properties of Mg alloy were also investigated by constant current method, potential polarization, collecting gas through drainage. The results show that tin restrained β-Mg17Al12 phase precipitation along the grain boundary. With the content of tin increasing, granular Mg2Sn phase was improved. After uniform heat treatment, most of β-Mg17Al12 phase was dissolved, but most of Mg2Sn was not dissolved. Tin could improve self-corrosion potential and release hydrogen rate. Magnesium alloy anode with 1% tin content had high discharge potential and current efficiency. With the current density increasing, the release hydrogen rate augmented. The current efficiency reached 82 % at 20mA/cm2. The main composition of the corrosion products were MgO and Al2O3 which were easily peeled off. As a result, more negative and stable work potential was produced and the reaction was accelerated continuously.Keywords
This publication has 12 references indexed in Scilit:
- Aging behaviour and electrochemical properties in Mg–4.8Hg–8Ga (wt.%) alloyCorrosion Science, 2010
- Influence of aluminium and lead on activation of magnesium as anodeTransactions of Nonferrous Metals Society of China, 2010
- Thermodynamic assessment of Mg-Ga binary systemTransactions of Nonferrous Metals Society of China, 2010
- Electrochemical behaviour and corrosion performance of Mg–Li–Al–Zn anodes with high Al compositionCorrosion Science, 2009
- An investigation on the use of indium to increase dissolution of AlZn anodes in sea waterMaterials & Design (1980-2015), 2008
- Influence of Ga and Hg on microstructure and electrochemical corrosion behavior of Mg alloy anode materialsTransactions of Nonferrous Metals Society of China, 2007
- The effect of milling on the performance of a Mo6S8 Chevrel phase as a cathode material for rechargeable Mg batteriesJournal of Solid State Electrochemistry, 2005
- Electrochemical insertion of magnesium ions into V2O5 from aprotic electrolytes with varied water contentJournal of Colloid and Interface Science, 2004
- Water-activated disposable and long shelf life microbatteriesSensors and Actuators A: Physical, 2004
- Rechargeable magnesium batteries with polymeric gel electrolytes containing magnesium saltsElectrochimica Acta, 2003