Testing conditions for CoMo HDS catalyst in the kinetic region: integrated approach using the math calculations and catalytic experiments
Open Access
- 24 April 2023
- journal article
- research article
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 10 (2) , 202310208
Abstract
The main idea of the investigation was to define testing parameters with the lowest influence of internal and external diffusion on catalytic activity in hydrodesulfurization of dibenzothiophene. Traditional experimental methods were used to determine the conditions for the influence of internal and external diffusion. Simultaneous change of a linear feedstock rate and a catalyst loading at constant weight hour space velocity were used to determine the process temperature (240–260 °C) at which the impact of external diffusion is minimal. Catalytic tests, including the variation of the catalyst fraction size, were carried out to define the conditions with the lowest influence of internal diffusion. It was found that when the catalyst with the fraction size of 0.1–0.25 mm was used, the fluctuation of sulfur conversion was the smallest. Besides, to validate experimental results, the calculations were performed with mass balance equations and expressions used for HDS modeling. The resulting data and catalytic experiments demonstrated that the lowest influence of internal and external diffusion is achieved at a temperature process less than 260 °C and a catalyst fraction of 0.1–0.25 mm.Keywords
This publication has 45 references indexed in Scilit:
- Simulation of the Effectiveness Factor for a Tri-Lobular Catalyst on the Hydrodesulfurization of DieselInternational Journal of Chemical Reactor Engineering, 2009
- Review on criteria to ensure ideal behaviors in trickle-bed reactorsApplied Catalysis A: General, 2009
- Study of intra-particle diffusion effect on hydrodesulphurization of dibenzothiophenic compoundsCatalysis Today, 2005
- A batch reactor study to determine effectiveness factors of commercial HDS catalystCatalysis Today, 2005
- Simulation of an isothermal hydrodesulfurization small reactor with different catalyst particle shapesCatalysis Today, 2004
- Three-Phase Reactor Model to Simulate the Performance of Pilot-Plant and Industrial Trickle-Bed Reactors Sustaining Hydrotreating ReactionsIndustrial & Engineering Chemistry Research, 2004
- Multiphase catalytic reactors: a perspective on current knowledge and future trendsCatalysis Reviews, 2002
- Kinetics of resid hydrotreating reactionsCatalysis Today, 1998
- Highly Restrictive Diffusion under Hydrotreating Reactions of Heavy Residue OilsIndustrial & Engineering Chemistry Research, 1995
- Catalytic reactor design, by M. Orhan Tarhan. McGraw‐Hill, 1983. 372 pages. $36.951984